1/6th scale HD 3D Printed MP-57 spring antenna base set. Set includes all the parts needed to assemble 1 MP-57 antenna base. This includes the spring and the antenna...$35.00 each set



1/6th scale New tooling HD 3D printed MP-37 spring antenna base set. Set includes all the parts needed to assemble 1 MP-37 spring antenna base. This includes the sping, and the antenna... $35.00 each set



1/6th scale 3D Printed WWII Jerry can holder set. Set includes a fully detailed WWII Jerry can holder, Brass Fasteners, Printed WWII Clasp, length of OD / Khaki webbing, and a strip of Aluminum for the strap end tab...$55.00 each set  



1/6th scale 3D Printed Post WWII Jerry can holder set. Set includes a fully detailed Post WWII Jerry can holder, Brass Fasteners, Printed Post WWII Clasp, length of Olive Green webbing, and a strip of Aluminum for the strap end tab...$55.00 each set  

 



1/6th scale USGI Jerry can 4 Pack. Set contains 4 Jerry cans, your choice of 2 Fuel cans, 2 Water cans, or 1 of each... $200.00 each pack





can options, select one

1/6th scale 3D Printed USGI Fuel jerry can 2 pack set. Set contains 2 Jerry cans, your choice of 2 Fuel cans, 2 Water cans, or 1 of each... $98.00 each pack





can options, select one

1/6th scale 3D pritned USGI Water jerry can. The Water can is fully detailed with all of the external details that would be present on the real unit. The can is printed hollow, and has a working cap. The Jerry can CAD file was designed a real USGI water jerry can that I have on hand in my collection so many of the subtle details that are on the real unit were brought into this model...$58.00 each




1/6th scale 3D Printed USGI Fuel jerry can. The Fuel can is fully detailed with all of the external details that would be present on the real unit. The can is printed hollow, and has a removable cap. A length of chain is also supplied. The Jerry can CAD file was designed a real USGI jerry can that I have on hand in my collection so many of the subtle details that are on the real unit were brought into this model...$58.00 each












1/6th scale Post WWII military vehicle equipment tiedown set. Set replicates the post WWII era USGI vehicle tie down straps. The set includes 7 large claps, and 10 smaller clasps. The clasps are 3D printed, and the sets also come with a length of Olive green webbing for use on the two sizes of the straps. There is enough webbing material for both 7 large straps and 10 smaller straps. The Set also comes with some strips of thin aluminum for use to scratch build the end tab detail found on the tie down ends... $55.00 each set





1/6th scale HD 3D printed USGI jerry can fuel cap set. Set includes 8 caps, a length of metal chain and some wire...$45.00 each set



1/6th scale 3D printed M31C pedestal mount set. Set contains the pedestal base, hinged functional travel lock, travel lock printed fastener, 3 side support legs, support printed fasteners, plastic rod, and a length of chain and metal fasteners. The unit will fit any of the ECA cradle mounts (NOT INCLUDED) ... $60.00 each set



1/6th scale 3D printed early production T47 / M31 pedestal mount w/ front support leg set. Set contains the pedestal base, hinged functional travel lock, travel lock printed fastener, front support, front support printed fasteners, plastic rod, and a length of chain and metal fasteners. The unit will fit any of the ECA cradle mounts (NOT INCLUDED) ... $50.00 each set




1/6th scale 3D printed early production T47 / M31 pedestal mount w/ no support set. Set contains the pedestal base, hinged functional travel lock, plastic rod, and a length of chain and metal fasteners. The unit will fit any of the ECA cradle mounts (NOT INCLUDED) ... $50.00 each set

   


1/6th scale 3d Printed and wood US AFV tool set. Set contains the following parts in 3D print, the large spanner wrench, the sledge hammer head, pickaxe head, and the Axe head. The set also contains the following parts in non treated wood, the Sledge hammer handle, the pick ax handle, and the ax handle... $40.00 each set



1/6th scale 3D printed Jeep step MG mount set. The set is designed to be fitted to the passenger side step section of the Jeep. The set contains the retracting travel lock for a M1919 reciever, the side support fastener, plastic rod, and a length of chain. The unit will fit any of the ECA cradle mounts (NOT INCLUDED) ... $48.00 each set




1/6th scale 3D printed D90210 Pedestal base set. Set includes enough parts to assemble 1 D90210 Pedestal base. This setup would normally be found on the M21 81mm mortar Half track. Set features the unique geometry of the base, weld bead detailing, tie down strap points, and a functional retracting travel lock. Another feature that is included is the flat spring clip retention system that secures the travel lock when not in use. Also included is a length of chain, plastic rod, and other hardware to assemble the travel lock pin. Set is designed to work with the ECA MG cradle mounts (NOT INCLUDED)... $75.00 each set



 

1/6th scale HD 3D Printed post WWII US AFV Siren. The siren is fully detailed with the interior baffle detailing, perforated face plate, rivet / fastener mounts, flange clamp, power cable plugs. Model was designed with a real unit on hand for maximum detailing. The siren also includes a length of wire. The Vehicle bracket mount is NOT INCLUDED ...$28.50 each



1/6th scale 3D printed H3 Halftrack directional thread single wheel set. The set includes the TPU semi flexible tire, PLA tire plugs, and the rim. No drum, hubcap, or fasteners are included. The rims are offered in two materials, SLS and PLA (see pics below).

PLA / ABS rim...$118.00 each set

SLS rim...$140.00 each set




ABS / PLA rims



SLS rims



Also there are two options available for the tires, with side rim and without side rib. Option does not change the price



Rim materials and Tire option, please select one

1/6th scale 3D printed H3 Halftrack non directional single wheel set. The set includes the TPU semi flexible tire, PLA tire plugs, and the rim. No drum, hubcap, or fasteners are included. The rims are offered in two materials, SLS and PLA (see pics below).

PLA / ABS rim...$118.00 each set

SLS rim...$140.00 each set



ABS / PLA rim

 

SLS rim



Also there are two options available for the tires, with side rim and without side rib. Option does not change the price


Rim materials and Tire option, please select one

1/6th scale 3D printed M3 Half track directional thread front tires no drums set. Set includes enough parts for 2 complete wheels with no internal Drums. This set includes 2 TPU semi flexible tires, PLA tire plugs, 2 Rims, 2 SLS hub caps, 2 PLA wheel drums, fasteners. The rims are offered in two materials, SLS and PLA (see pics below).

PLA / ABS rims...$190.00 each set

SLS rims...$260.00 each set




ABS / PLA rims


 

SLS rims



Also there are two options available for the tires, with side rim and without side rib. Option does not change the price


Rims material and Tire option, please select one

1/6th scale 3D printed M3 Half track non directional front tires no drums set. Set includes enough parts for 2 complete wheels with no internal Drums. This set includes 2 TPU semi flexible tires, PLA tire plugs, 2 Rims, 2 SLS hub caps, 2 PLA wheel drums, fasteners. The rims are offered in two materials, SLS and PLA (see pics below).

PLA / ABS rims...$190.00 each set

SLS rims...$260.00 each set




ABS / PLA rims

 

SLS rims



Also there are two options available for the tires, with side rim and without side rib. Option does not change the price



Rims material and Tire option, please select one

1/6th scale 3D printed M3 Halftrack directional thread front tires set. Set includes enough parts for 2 complete wheels. This set includes 2 TPU semi flexible tires, PLA tire plugs, 2 Rims, 2 SLS hub caps, 2 PLA wheel drums, fasteners. The rims are offered in two materials, SLS and PLA (see pics below).

PLA / ABS rims...$250.00 each set

SLS rims...$320.00 each set



ABS / PLA rims



SLS rims



Also there are two options available for the tires, with side rim and without side rib. Option does not change the price



Rims material and Tire option, please select one

1/6th scale 3D printed M3 Halftrack non directional front tires set. Set includes enough parts for 2 complete wheels. This set includes 2 TPU semi flexible tires, PLA tire plugs, 2 Rims, 2 SLS hub caps, 2 PLA wheel drums, fasteners. The rims are offered in two materials, SLS and PLA (see pics below).

PLA / ABS rims...$250.00 each set

SLS rims...$320.00 each set



ABS / PLA rims

 

SLS rims



Also there are two options available for the tires, with side rim and without side rib. Option does not change the price




Rims material and Tire option, please select one

1/6th scale hollow 3D Printed Modern era US AFV tail light set. Set includes 2 complete tail lights.Set includes 2 hollow printed Post war US AFV tail light bodies w/ details and 2 translucent HD material lens detail faces. Being hollow, the sets can be modded for lighted model use. The bodies are divided to allow the use of two LEDs, in case the builder would like to have both tail light and the backup light function. Lighting equipment NOT included... $38.00 each set



1/6th scale HD 3D Printed Modern era US AFV tail light lens set. Set includes 2 rear translucent HD 3D printed tail light faces... $33.00



1/6th scale HD 3D Printed M151 Mutt front hood locks set. Set includes the Hooks, setms, fender mounts, and hood mounts. Set includes enough parts to equip 1 M151 Mutt and several parts for spares... $25.00 each set

 

3D Printed US AFV Tool rack. This unit will work on many US military vehicles including the, V100 armored car, M48 Patton, M46 Patton, Deuce trucks, Dodge WC series light trucks, T30 Super heavy tank... etc. Unit requires no assembly and is printed in 1 piece. Tools not included...$44.00 each




1/6th scale 3D printed Modern era US Military vehicle antenna mounting bracket. Set will work with the AB-558 and the AS-3900 antenna bases. Antenna base not included...$20.00 each






1/6th scale AS-3900 antenna base set. Set includes HD3D printed antenna base, fasteners, antenna wire end tips. Also included is a metal wire for the antenna, a cast rubber spring section, and cast rubber protective cap. Both are made from HD3D printed masters...$34.00 each set



1/6th scale AB-558 antenna base set. Set includes HD 3D printed antenna base, fasteners, antenna wire end tips, and antenna stem. Also included is a Cast rubber center flexible section, and the antenna wire... $27.00 each set



1/6th scale 3D printed post WWII US soft skin "Sugar Scoop" antenna base mount set. Set includes the antenna base mount, and the fasteners to mount the unit to the vehicle... $24.00 each set

 

1/6th scale M151 Mutt MP-65 antenna complete set. Set includes the 3D printed antenna base mount, a HD 3D printed MP-65 antenna base bottom section, and a cast rubber MP-65 antenna base... $35.00 each set



1/6th scale 3D printed M151 Mutt MP-65 antenna base holder...$20.00 each



1/6th scale 3D printed US soft Skin AFV reversible antenna base mount. The mount is designed to be fitted to a vehicle in one of two ways like the real unit (brass mounting fasteners included)... $20.00 each



1/6th scale HD 3D printed US AFV Fluid ID plates set. Set includes enough plates for 1 US tank... $21.00 each set



1/6th scale 3D Printed German WWII Double fuel drum trailer kit... $840.50 each 
>>PRE ORDER AVAILABE NOW<<

Kit includes the following features

All 3D Printed construction
Cast Rubber tires
Rolling wheels
Complete under chassis / frame detailing
fasteners
Rubber hose
drum clamps
Fuel drum spout
Fits 2 german WWII fuel drums  
*NOT INCLUDED*will work with both the Dragon metal fuel drum or the "chinesium" ali express drum *NOT INCLUDED*



1/6th scale Vietnam era M416 Jeep / mutt trailer. Trailer is made of mostly 3D printed parts. The features are listed below...$745.00 each
>>PRE ORDER AVAILABE NOW<<

All 3D Printed construction
M416 pattern of lunette mounts, fenders, and under frame details
Cast Rubber tires
Rolling wheels
Metal chain
Electrical Wire
HD Clear tail light lenses, and hollow tail light bases
Complete under chassis / frame detailing 
Fuctional cast rubber bed drains
HD socket plug for M38 Jeep / M151 Mutt
Metal break line cables
One Piece construction traler frame, suspension, and bed
Spring buffer tow lunette
Functional rectracting stanchion leg
Reversible tow lunette
HD side grab handles
HD M416 pattern hand brake
Choice of early pattern M151, late M151, and M38 pattern of wheel rims
HD clear black out tail lamp
Dual cast rubber drain plugs w/ springs

 
Wheel Rim options, select one

1/6th scale 3D printed D38579 cradle mount set. Set is printed in HD material. Set includes the yolk mount, locking pins for M2HB, M1919, and M1918A2 BAR. Also included is a length of metal chain...$28.00 each

 

1/6th scale HD 3D printed  m2hb 50.cal flash supressor...$20.00 each



3D Printed German WWII single fuel drum trailer kit... $696.00 each 

Kit includes the following features

All 3D Printed construction
Cast Rubber tires
Rolling wheels
Complete under chassis / frame detailing
fasteners
Rubber hose
drum clamps
Fuel drum spout  
*NOT INCLUDED*will work with both the Dragon metal fuel drum or the "chinesium" ali express drum *NOT INCLUDED*

**Note* the completed unit in the below images was the pre production sample. The production units will be improved from the one in the images



First pics of the Production unit!



3D printed / cast rubber German AFV wheel set. Set includes 2 3D printed rims, 2 cast rubber tires, and 2 cast rubber valve stems. Also included are the hub cap details... $137.00 each set



3D printed M151A2 Mutt front grill winter cover mounts set. Set includes enough mounts for 1 M151A2 Mutt (with two spares). Mounts are printed in HD material... $19.00 each set




3D Printed M151A2 Mutt gas tank top portion set. Gas tank section is printed hollow, comes with the fuel line tubes, and features a removable filler cap...$50.00 each set



3D Printed M151 Mutt rear wheel well support bracket set. Each set comes with 2 brackets (Enough for 1 M151 Mutt)...$19.50 each set

 


3D Printed US AFV Bow Headlights set. Sets include and hollow headlight and block out light bases. Also included are clear printed headlight lenses and blackout lens faces. Sets are designed to have LEDs or bulbs fitted for functional use (Electronics NOT included) ...$40.00 each set



3D Printed functional US soft skin heavy tow hitch set. Set includes the tow hitch, moutning castle nut, chain, Spring, washers, and retention pins. This set is designed for use on M3 Half tracks, and White Scout cars...$38.00 each



3D printed full functional M151 pattern tow pintle / hitch set. The unit is printed as a single functional unit. Also included are 4 brass fasteners...$25.00 each





3D Printed Post WWII M38 Jeep style cat eye lenses. Set includes one cat eye lens and one black out lens... $25.00 each set



3D printed Post WWII US AFV bracketed rear tail light set. Set includes 2 hollow printed Post war US AFV tail light cups w/ details and 2 clear HD material cat eye lenses. Being hollow the sets can be modded for lighted model use. Lighting equipment NOT included...$38.00 each set



3D printed M100 / M416 trailer corner handle set. Set contains 4 handles and is designed to upgrade a Hasbro or 21st century toys jeep trailer...$25.00 each set.



Post WWII M100 Jeep Trailer full kit. Trailer is made of mostly 3D printed parts. The features are listed below...$785.00 each

All 3D Printed construction
Cast Rubber tires
Rolling wheels
Metal chain
Electrical Wire
HD Clear tail light lenses, and hollow tail light bases
Complete under chassis / frame detailing 
Fuctional cast rubber bed drains
HD socket plugs for both MB / willys WWII jeep and M38 / M151 jeeps
Functional light cable storage box
Functional light cable protective cover caps 
Metal break line cables
One Piece construction traler frame, suspension, and bed
Spring buffer tow lunette
Functional rectracting stanchion leg



3D printed full functional 1/4 ton tow pintle / hitch set. The unit is printed as a single functional unit. Also included are the saftey chain ring mounts and two brass fasteners...$30.00 each



Converto airborne dump trailer full kit. Trailer is made of mostly 3D printed parts. The features of the trailer are listed below... $580.00 each

All 3D Printed construction
Cast Rubber tires
Rolling wheels
Functional Dump feature
Functional tail gate
Functional tube sliding door
Functional locking dump lever
Functional tailgate release lever
Functional spring bound tow pintle eye
Functional folding / retracting trailer support stanchion leg
Removable tailgate
Metal chain
Electrical Wire
HD Clear tail light lenses, and hollow tail light bases
Under chassis / frame detailing 

*oil drum and figure NOT included*





3D Printed US soft skin reflector set. Set is printed in clear HD material...$20.00 each set



3D printed M3 Lee / bracketed rear tail light set. Set includes 2 hollow printed US AFV tail light cups w/ details and 2 clear HD material cat eye lenses. Being hollow the sets can be modded for lighted model use. Lighting equipment NOT included...$38.00 each set


3D Printed WWII Jeep pattern rear tail light lens set. Set includes one cat eye lens and one black out lens...$20.00



WWII pattern Jeep Trailer full kit. Trailer is made of mostly 3D printed parts. The features are listed below...$751.00 each

All 3D Printed construction
Cast Rubber tires
Rolling wheels
Metal chain
Electrical Wire
HD Clear tail light lenses, and hollow tail light bases
Complete under chassis / frame detailing 
Fuctional cast rubber bed drain
HD socket plug
Metal break line cables
One Piece construction traler frame, suspension, and bed
Spring buffer tow eye
Functional rectracting support leg



3D printed / rubber 1941 pattern jeep wheel complete set. Set includes 2 3D printed early pattern 1941 pattern wheel rims, front center hub, 2 3D printed 1941 pattern rims with rear center hub, 4 cast rubber tires, and cast rubber valve stems. 1 set is enough for one jeep... $87.00 each set

Rear wheel

  

Front wheel





3D printed / rubber 1941 pattern jeep wheel set, Trailer wheels version. Set includes 2 3D printed early pattern 1941 pattern wheel rims, trailer center hub, two cast rubber tires, and cast rubber valve stem. 1 set is enough for one trailer...$60.00 each set




3D printed / rubber M3 37mm AT gun replacement wheel set. Set includes 2 3D printed early pattern 1941 pattern wheel rims, 37mm center hub, two cast rubber tires, and cast rubber valve stem...$60.00 each set



3D printed / rubber 1941 pattern jeep spare tire. Set includes 1 3D printed early pattern 1941 pattern wheel rim, no center hub, cast rubber tire, and cast rubber valve stem...$35.00 each set

  


Resin M3 Halftrack rear differential set. Set includes enough components and fasteners to assemble one differential, and to mount on ECA M3 halftrack drive sprockets (Not Included)....65.00 Each set



Resin M25 pedestal mount set. Set can be used to mount M2HB, M1919, or M1917 machinguns. Set includes pre drilled Resin mount, pre assembled pintle lock and fasteners...$20.00 each setbr />


Resin functional M3 Halftrack VVSS suspension kit. Kit includes enough components to assemble two VVSS bogie trucks ( enough for one Halftrack ). Sets have been upgraded where they now feature 3D printed road wheels. Sets are designed to be functional, but are desinged for staic display use.

White Nylon wheels... $480.00 each set
Black Nylone wheels...$510.00 each set




material options, select one

Resin M3 Halftrack rear idler wheel set. Set includes enough components to assemble two idler wheels...$40.00 each set



Hand Made Cloth US AFV collapsible bucket. Bucket is Hand Made and is fully collapsible. Features real metal ridigty ribs and stifiner tube in the handle. Also present is the U.S. mark stamped into the surface. Limited Edition, 55.00 each




Resin M3 Halftrack Front drive sprocket set. Set includes enough components to assemble two drive sprockets...60.00 each set.




Resin US Soft Skin shorty Pintle mount kit. Kit is designed to be mounted on top of the dash board of a SAS style jeep. Kit includes all components to assemble the pinlte mount including the cover cap and chain...$8.50 each



Resin M2HB symmetrical five hole barrel support conversion. Conversion is designed for the Dragon M2HB plastic kit. Dragon kit is NOT included...$5.50 each.



Resin M2HB early short barrel conversion set. Set is designed for the Dragon 1/6th scale M2HB plastic kit. Dragon kit is NOT included. Set includes one slotted barrel support and one short barrel...$10.50 each set.


 

Resin M2HB slotted barrel support conversion. Conversion is designed to replace the holed barrel support on the Dragon M2HB kit. Dragon kit is NOT included....$5.00 each. 



New tooling flexible resin MP-65 vehicular mast base set. Set includes one antenna base and one antenna...$9.50 each



Early US AFV headlight set. Set will work on most early war period US armored vehicles including the M3 Lee series , M3 Grant, M3 Stuart Series, and M6 Heavy tank. Set includes enough components to assemble two complete head light clusters.....$20.00 each set.



Resin US antitank gun scope kit. (Kit includes 1 scope and 1 scope mount)...$5.50 each



Resin 50.cal scope kit. (Kit includes 1 scope and 1 scope mount).....$5.50 each



Resin US AFV funnel horn....$8.50



Resin US AFV spare periscope box set. (Set includes 3 resin boxes)...$8.50 each set



Resin US SRC-508 radio kit....$45.00 each kit



Resin US AFV Tow Cable cleat......$1.75 each



Fully Assembled radio controlled MP48 spring antenna base.
(This component is meant to extend the radio range on any 1/6th scale US tank, *Note this component will not work with the stock RC M5 Stuart electronics)....$30.00 each



Fully assembled resin MP48 spring antenna base. (Soft skin armor version, includes external insulators)...$11.50 each



Fully assembled resin MP-48 spring antenna base.........$10.50 each

MVC-001S.JPG (38266 bytes) MVC-002S.JPG (39780 bytes) MVC-003S.JPG (38552 bytes) MVC-004S.JPG (38712 bytes)

Resin "Insta Weld" weld beads set Set Includes 1 foot of welds...$5.00 each foot


Home1/6th scale1/35th scaleModel GalleryContactLinks