 | |
    3D Printed 50.cal Tombstone ammo can set. Set includes enough parts for 1 tombstone ammo can. The model is very detailed with all the external and internal detailing. These details include the rotating spool, opening top portion, functional lid securing clips, interior belt rollers, spool axle, exterior detailing, metal wire for a working handle, and pins for the main and clip hinges. The set is designed to work with all the ECA cradle mounts (shown in pictures *NOT INCLUDED* ), and just slips in place like the rear unit. There are two options, one with the wording embossed on the body and the second without... $65.00 each 
 
 
 
 
 
 
 
 
 1/6th scale HD 3D Printed MP-57 spring antenna base set. Set includes all the parts needed to assemble 1 MP-57 antenna base. This includes the spring and the antenna...$35.00 each set 
  1/6th scale New tooling HD 3D printed MP-37 spring antenna base set. Set includes all the parts needed to assemble 1 MP-37 spring antenna base. This includes the sping, and the antenna... $35.00 each set 
 
 1/6th scale 3D Printed WWII Jerry can holder set. Set includes a fully detailed WWII Jerry can holder, Brass Fasteners, Printed WWII Clasp, length of OD / Khaki webbing, and a strip of Aluminum for the strap end tab...$55.00 each set 
 1/6th scale USGI Jerry can 4 Pack. Set contains 4 Jerry cans, your choice of 2 Fuel cans, 2 Water cans, or 1 of each... $200.00 each pack 
 
 1/6th scale 3D Printed USGI Fuel jerry can 2 pack set. Set contains 2 Jerry cans, your choice of 2 Fuel cans, 2 Water cans, or 1 of each... $98.00 each pack
1/6th scale 3D pritned USGI Water jerry can. The Water can is fully detailed with all of the external details that would be present on the real unit. The can is printed hollow, and has a working cap. The Jerry can CAD file was designed a real USGI water jerry can that I have on hand in my collection so many of the subtle details that are on the real unit were brought into this model...$58.00 each
 
 1/6th scale 3D Printed USGI Fuel jerry can. The Fuel can is fully detailed with all of the external details that would be present on the real unit. The can is printed hollow, and has a removable cap. A length of chain is also supplied. The Jerry can CAD file was designed a real USGI jerry can that I have on hand in my collection so many of the subtle details that are on the real unit were brought into this model...$58.00 each 
 
 
 
 
 
 
 1/6th scale HD Metal 3D Printed functional 50.cal travel lock kit. Kit contains all parts to assemble 1 retracting 50.cal pintle mount...$65.00 each set 
 1/6th scale Metal 3D printed functional US AFV tow cable lock set. Set comes with enough parts to assemble two working tow cable lock (enough for 1 vehicle)... $65.00 each set 
 1/6th scale 3d Printed and wood US AFV tool set. Set contains the following parts in 3D print, the large spanner wrench, the sledge hammer head, pickaxe head, and the Axe head. The set also contains the following parts in non treated wood, the Sledge hammer handle, the pick ax handle, and the ax handle... $40.00 each set 
 
 1/6th scale Metal 3D printed 75mm turret 50.cal receiver storage rack only...$65.00 each 
 1/6th scale 3D printed M26 Pershing rear grillwork set. Set includes the 4 top grills and the 4 lower grills. All grills have the correct weld bead detailing, exterior / interior detailing, and hinge detailing. Set also comes with metal wire to fabricate the lift handles. Grills are fully functional and were designed to work with the Armortek M26 Pershing kit... $450.00 each set 
 
 
 
 1/6th scale HD 3D printed General Steel "Super G" crest badge logo set. Set contains 21 General steel badges of 3 sizes that are used to add detailing to the surface of cast items on US tanks. These logos were present on casted parts made by the General Steel company and are found on casted components along with numbers. Typically found on hull and turret castings along with other items... $40.00 each set 
 1/6th scale 3D printed M26 Pershing storage bin handles set, set will work on any US tank from the M26 Pershing to the M60. Set includes 14 printed handles, and overtravel stops / padlock mounts...$60.00 each set 
 1/6th scale M26 periscopes HD 3D printed / metal Open or closed "Super set". Set includes 5 3D printed US AFV periscopes in either the open or closed position and 5 metal brush guards. The periscopes are rendered in the open position complete with prism details and outer cover details, the untits that are printed in the closed state have the same cover cap and return spring details. The open periscopes are printed in translucent HD 3D print, while the closed units are in opaque HD printed resin. The set also comes with 5 metal 3D printed brush guards, the guards are a plug in installation. You can choose between all open, all closed or a mix of the two, your choice... $240.00 Each set 
 1/6th scale M26 Pershing functional fuel filler caps set. Set includes 3 armored covers and interior filler details, pre welded hinges, retention pins, lengths of wire to fabricate the fuel filler cap handle and metal chain... $75.00 each set 
 1/6th scale HD 3D Printed post WWII US AFV Siren. The siren is fully detailed with the interior baffle detailing, perforated face plate, rivet / fastener mounts, flange clamp, power cable plugs. Model was designed with a real unit on hand for maximum detailing. The siren also includes a length of wire. The Vehicle bracket mount is NOT INCLUDED ...$28.50 each 
 1/6th scale Brass 3D Printed US AFV periscope brush guards set. Set includes 3 Brass 3D Printed Brush guards. These are made with the same CAD file used on the standard material and HD material brush guards, but made in Brass... $75.00 Each set 
 1/6th scale 3D US AFV external telephone box kit. Kit contains all 3D printed components which includes a fully functional front door, opening handle, HD translucent indication light, power cable inlet cover cap. The unit also has full interior detailing which includes a HD 3D printed handset, the control knobs, handset hookup, inner lid weather strip detailing, fastener detailing, prewelded mounting bosses, and functional door locks. Set also includes the power cable wiring and several springs for the other fitting details... $105.00 each set 
 
 1/6th scale 3D printed US AFV armored first aid container style 2. This set is designed to be fully functional. This is the version with the dual mounting arms that run along the side portions of the container. Set contains all the latch and hinge components along with the hardware to hinge everything together...$61.25 each set 
 
 1/6th scale HD 3D printed 75mm turret 50.cal receiver storage rack only...$36.00 each
1/6th scale 3D printed 75mm turret rear bustle 50.cal storage racks set. Set includes two HD printed M3 barrel clips, HD 3D Printed M2 receiver clamp, and 2 standard Printed clip mounting brackets...$57.00 each set 
 1/6th scale 3D printed US AFV loaders hatch set. Set is also designed to work for the Dragon Sherman tank. Set includes enough components to assemble 1 complete loader's hatch. The hatch is full function and also includes springs, a functional locking mechanism and a cast rubber headrest... $90.00 each set 
 
 1/6th scale HD 3D printed US Tank non elevated vane sight. This unit will work for the following vehicles, 76mm T34 turret. M4A3E2 Jumbo turret, M26 pershing, M46 Patton, T29 heavy tank series...$20.00 each 
1/6th scale HD 3d Printed functional 50.cal travel lock kit. Kit contains all parts to assemble 1 retracting 50.cal pintle mount. Set is offered in two options, with weld bead details and without...$20.00 each set welded, 
 Non welded, 
 1/6th scale 3D Printed US AFV retracting Pedestal base set. Set includes enough parts to assemble 1 gun mount. The set also includes a cast rubber water plug, and metal chain...$20.00 each set 
 
 1/6th scale HD 3D printed US AFV Fluid ID plates set. Set includes enough plates for 1 US tank... $21.00 each set 
 1/6th scale HD 3D printed functional US AFV tow cable lock set. Set comes with enough parts to assemble two working tow cable lock (enough for 1 vehicle). Set is designed to be snap together assembly... $21.00 each set 
1/6th scale HD 3D printed m2hb 50.cal flash supressor...$20.00 each 
 
 3D Printed US AFV Bow Headlights set. Sets include and hollow headlight and block out light bases. Also included are clear printed headlight lenses and blackout lens faces. Sets are designed to have LEDs or bulbs fitted for functional use. (electronics not included)...$40.00 each set 
 3D Printed functional US AFV heavy tow hitch set. Set includes the tow hitch, moutning castle nut, chain, and retention pins...$35.00 each 
 3D printed US AFV periscope guards. There are two options, standard material and HDbr /> Standard material...$16.00 each HD material...$19.00 each 
Resin M2HB symetrical five hole barrel support conversion. Conversion is designed for the Dragon M2HB plastic kit. Dragon kit is NOT included...$5.50 each. 
Resin M2HB early short barrel conversion set. Set is designed for the Dragon 1/6th scale M2HB plastic kit. Dragon kit is NOT included. Set includes one slotted barrel support and one short barrel...$10.50 each set. 
 Resin M2HB slotted barrel support conversion. Conversion is designed to replace the holed barrel support on the Dragon M2HB kit. Dragon kit is NOT included....$5.00 each.
New tooling flexible resin MP-65 vehicular mast base set. Set includes one antenna base and one antenna...$9.50 each 
Resin M26 family head light posts set, set includes two head lights posts. Head light and brush guards not included...$6.50 each set. 
 
 Resin M26 Pershing family Bow hatches set, Set includes enough resin and metal components to assemble two hatches....$30.00 each set * Inner Periscope detail shown are not included, Inner periscopes can be purchased at http://www.panzerwerk.com/ 
 
 Resin early M26 (T26E3) exhaust manifold / main gun travel lock cluster kit. Kit includes enough components to assemble one complete exhaust / travel lock cluster....$35.00 each kit. 
Resin US AFV track connector jack set. Set includes enough components to assemble two jacks...$25.00 each set. 
 Resin T80E1 track links complete set. Set will work on M26 Pershing, M46 Patton, M47 Patton, T-28 supper heavy tank, and T-30 supper heavy tank series. Set includes 180 track Links, and pre cut steel shafts...$500.00 complete set. 
 Resin M3 90mm gun double baffle muzzle brake. Muzzle brake will work on M36 / M36B1 Jackson, and M26 Pershing...$25.00 each. 
 Functional resin M26 spent shell port hatch kit. Kit will work on the following tanks, M26 / M26A1 Pershing, M46 Patton, and M45. Kit includes enough components to assemble one hatch....$9.50 each kit 
 Resin M26 / M46 / M47 Pershing / Patton drive sprocket set. Set includes enough components to assemble two drive sprockets. Set contains both cast resin and 3D printed late pattern tooth rings....$125.00 each set 
 
 
 M26 Pershing suspension and running gear package. Package includes enough resin and metal components to assemble one M26 or M26A1 tank suspension. Sprockets , drive sprockets, and track are NOT INCLUDED....$800.00 each package 
  Resin M26 Pershing transmission final drives set. Set includes two final drives...$65.00 each set 
 Hollow resin US AFV pivotable shrouded searchlight kit. Kit includes clear resin lens and enough components for one hollow search light with cover cap...$26.00 each kit 
 
 Clear Resin US AFV pivotable shrouded searchlight kit. Kit includes enough components for one search light...$20.00 each kit 
Resin M4 Sherman late war commander's copula full interior kit. Kit includes enough components to build the the copula with the interior details....$85.00 each kit 
 Resin M4 Sherman late war commander's copula basic kit. Kit includes enough components to build a exterior detailed copula....$80.00 each kit
Resin "Insta Weld" weld beads set Set Includes 1 foot of welds...$5.00 each foot each foot 
Resin M5 Stuart top deck fire extinguisher box kit.....$6.50 each 
 Resin US AFV funnel horn....$8.50  Resin US AFV hollow tail light set. (Set includes 2 tail lights and bases)......$9.50 each form Resin tow hitch mount kit....$10.50 each 
 Resin rear turret bustle 50.cal storage pintle kit. Kit will work on M4 75mm, 105mm, 76, Jumbo, M36 Jackson, and many more US tanks.....$9.50 each 
Resin Sherman family gunner's periscope guard box kit.....$10.50 each 
 Resin 50.cal scope kit. (Kit includes 1 scope and 1 scope mount).....$5.0 each 
 Resin mantlet 30 cal. stub.........$5.50 each 
 Hatch retaining latch kit....$0.60 each   Fully assembled resin MP48 spring antenna base. (Soft skin armor version, includes external insulators)...$11.50 each 
Fully assembled radio controlled MP48 spring antenna base. This component is ment to extend the radio range on any 1/6th scale RC US tank. *Note this component will not work with the stock RC M5 Stuart electronics....$30.00 each 
 Fully assembled resin MP-48 spring antenna base.........$10.50 each 
 |
|
| Home1/6th scale1/35th scaleModel GalleryContactLinks | |
