 | |
     1/6th scale 3D Printed Post WWII Jerry can holder set. Set includes a fully detailed Post WWII Jerry can holder, Brass Fasteners, Printed Post WWII Clasp, length of Olive Green webbing, and a strip of Aluminum for the strap end tab...$55.00 each set 
  1/6th scale USGI Jerry can 4 Pack. Set contains 4 Jerry cans, your choice of 2 Fuel cans, 2 Water cans, or 1 of each... $200.00 each pack 
 
 1/6th scale 3D Printed USGI Fuel jerry can 2 pack set. Set contains 2 Jerry cans, your choice of 2 Fuel cans, 2 Water cans, or 1 of each... $98.00 each pack
1/6th scale 3D pritned USGI Water jerry can. The Water can is fully detailed with all of the external details that would be present on the real unit. The can is printed hollow, and has a working cap. The Jerry can CAD file was designed a real USGI water jerry can that I have on hand in my collection so many of the subtle details that are on the real unit were brought into this model...$58.00 each
 
 1/6th scale 3D Printed USGI Fuel jerry can. The Fuel can is fully detailed with all of the external details that would be present on the real unit. The can is printed hollow, and has a removable cap. A length of chain is also supplied. The Jerry can CAD file was designed a real USGI jerry can that I have on hand in my collection so many of the subtle details that are on the real unit were brought into this model...$58.00 each 
 
 
 
 
 
 
 1/6th scale Post WWII military vehicle equipment tiedown set. Set replicates the post WWII era USGI vehicle tie down straps. The set includes 7 large claps, and 10 smaller clasps. The clasps are 3D printed, and the sets also come with a length of Olive green webbing for use on the two sizes of the straps. There is enough webbing material for both 7 large straps and 10 smaller straps. The Set also comes with some strips of thin aluminum for use to scratch build the end tab detail found on the tie down ends... $55.00 each set 
 
 
 1/6th scale HD 3D Printed post WWII US AFV Siren. The siren is fully detailed with the interior baffle detailing, perforated face plate, rivet / fastener mounts, flange clamp, power cable plugs. Model was designed with a real unit on hand for maximum detailing. The siren also includes a length of wire. The Vehicle bracket mount is NOT INCLUDED ...$28.50 each 
 1/6th scale HD 3D Printed M151A2 Mutt electrical socket set. Set includes the rear trailer socket plug w/ functional cover. Also included with the set is the front capped slave plug... $25.00 each set 
 
 
 1/6th scale hollow 3D Printed Modern era US AFV tail light set. Set includes 2 complete tail lights.Set includes 2 hollow printed Post war US AFV tail light bodies w/ details and 2 translucent HD material lens detail faces. Being hollow, the sets can be modded for lighted model use. The bodies are divided to allow the use of two LEDs, in case the builder would like to have both tail light and the backup light function. Lighting equipment NOT included... $38.00 each set 
 1/6th scale HD 3D Printed Modern era US AFV tail light lens set. Set includes 2 rear translucent HD 3D printed tail light faces... $33.00
1/6th scale HD 3D Printed M151 Mutt front hood locks set. Set includes the Hooks, setms, fender mounts, and hood mounts. Set includes enough parts to equip 1 M151 Mutt and several parts for spares... $25.00 each set 
  1/6th scale 3D printed Modern era US Military vehicle antenna mounting bracket. Set will work with the AB-558 and the AS-3900 antenna bases. Antenna base not included...$20.00 each 
 
 
 
 1/6th scale AS-3900 antenna base set. Set includes HD3D printed antenna base, fasteners, antenna wire end tips. Also included is a metal wire for the antenna, a cast rubber spring section, and cast rubber protective cap. Both are made from HD3D printed masters...$34.00 each set 
 
 1/6th scale AB-558 antenna base set. Set includes HD 3D printed antenna base, fasteners, antenna wire end tips stem. Also included is a Cast rubber center flexible section, and the antenna wire... $27.00 each set 
 1/6th scale 3D printed M151 Mutt rear elevated antenna base mount W/ Sugar Scoop right hand version. This version comes with the Sugar Scoop antenna base mount. On this unit the mount is secured to the right hand side of the elevated mount... $37.00 each 
  
 
 1/6th scale 3D printed M151 Mutt rear elevated antenna base mount W/ Sugar Scoop left hand version. This version comes with the Sugar Scoop antenna base mount. On this unit the mount is secured to the left hand side of the elevated mount... $37.00 each 
 
 1/6th scale 3D printed M151 Mutt rear elevated antenna base mount, blank version. This version is left blank, which means it doesn't come with the antenna base mount or the antenna base, but is antenna base mount ready... $30.00 each 
1/6th scale 3D printed post WWII US soft skin "Sugar Scoop" antenna base mount set. Set includes the antenna base mount, and the fasteners to mount the unit to the vehicle... $24.00 each set 
1/6th scale M151 Mutt MP-65 antenna complete set. Set includes the 3D printed antenna base mount, a HD 3D printed MP-65 antenna base bottom section, and a cast rubber MP-65 antenna base... $35.00 each set 
 
1/6th scale 3D printed M151 Mutt MP-65 antenna base holder...$20.00 each
1/6th scale 3D printed M151 Mutt battery box cover set. Set includes the hollow battery box cover and two HD printed non functional latches... $40.00 each set 
 1/6th scale 3D printed US soft Skin AFV reversible antenna base mount. The mount is designed to be fitted to a vehicle in one of two ways like the real unit (brass mounting fasteners included)... $20.00 each 
 1/6th scale Vietnam era M416 Jeep / mutt trailer. Trailer is made of mostly 3D printed parts. The features are listed below...$745.00 each >>PRE ORDER AVAILABE NOW<< All 3D Printed construction M416 pattern of lunette mounts, fenders, and under frame details Cast Rubber tires Rolling wheels Metal chain Electrical Wire HD Clear tail light lenses, and hollow tail light bases Complete under chassis / frame detailing Fuctional cast rubber bed drains HD socket plug for M38 Jeep / M151 Mutt Metal break line cables One Piece construction traler frame, suspension, and bed Spring buffer tow lunette Functional rectracting stanchion leg Reversible tow lunette HD side grab handles HD M416 pattern hand brake Choice of early pattern M151, late M151, and M38 pattern of wheel rims HD clear black out tail lamp Dual cast rubber drain plugs w/ springs 
3D printed M151A2 Mutt front grill winter cover mounts set. Set includes enough mounts for 1 M151A2 Mutt (with two spares). Mounts are printed in HD material... $19.00 each set 
 3D printed M151 Mutt instrument panel / dash accessories complete set. Set includes the instrument panel and the dash other switches and controls for the dash. All parts are printed in HD material..$25.00 each set 
 
3D printed M151 Mutt instrument panel. Instrument panel printed in HD material...$19.50 each set
3D Printed M151 Dash controls set. Set contains several control switches and knobs that are found on the M151 Mutt Dash. Parts are printed in HD material...$19.50 each set
3D Printed M151A2 Mutt gas tank top portion set. Gas tank section is printed hollow, comes with the fuel line tubes, and features a removable filler cap...$50.00 each set 
 3D Printed M151 Mutt rear wheel well support bracket set. Each set comes with 2 brackets (Enough for 1 M151 Mutt)...$19.50 each set 
3D Printed full functional M151 pattern tow pintle / hitch set. The unit is printed as a single functional unit. Also included are 4 brass fasteners...$25.00 each 
 
 3D Printed Post WWII M38 Jeep style cat eye lenses. Set includes one cat eye lens and one black out lens... $25.00 each set 
3D Printed M151A2 Pattern steering wheel complete set. Set includes steering wheel, steering column, and a cast rubber center portion... $20.00 each set 
 3D Printed M151A2 Steering wheel set. Set includes Steering wheel and cast rubber center portion only...$15.00 each set 3D Printed M151A2 Mutt windshield complete set. Set includes windshield frame, folding hinges, pivoting side view mirror, rear view mirror, wipers, wiper motor, rubber bump stops, real glass mirror inserts, and windshield template With clear Lexan plastic windshield blank...$165.00 Without Lexan plastic windshield blank...$154.02 
 
 
 3D Printed M151A2 windshield wipers and motor set. Set includes 2 wipers and 1 geared motor... $30.00 each set 
 3D Printed M151 pattern windshield rear view mirror set. Set includes mirror frame, real glass mirror insert, and mirror mount... $25.00 each set 
 3D Printed PRC-77 radio complete set. Set includes the PRC-77 radio, The Amp unit, and the vehicle tray...$190.00 each set 
 
 M151A2 Mutt complete early pattern domed wheel set. Set is designed to replace the 4 underscale wheels on the 21st Century Toys / The Ulitmate Soldier M151A2 Mutt. Set also Incudes the rear spare tire. Each Wheel consists of a 3D Printed Hub, Flex Resin Valve stem, and a Cast rubber Tire...$128.50 each set 
 
 
 
 
 M151A1 Mutt complete early pattern wheel set. Set is designed to replace the 4 underscale wheels on the 21st Century Toys / The Ulitmate Soldier M151A2 Mutt. Set also Incudes the rear spare tire. Each Wheel consists of a 3D Printed Hub, Flex Resin Valve stem, and a Cast rubber Tire...$128.50 each set 
M151A2 Mutt early pattern Spare tire set. Spare tire is comprised of three parts. 1 3D Printed hub, 1 cast rubber tire, and 1 flex resin valve stem...$58.00 each
M151A2 Mutt trailer early pattern wheel set. Set includes enough parts for 2 wheels that are inteded to upgrade the 21st Century toys M151A2 Trailer. Each Wheel is comprised of three parts. 1 3D Printed hub, 1 cast rubber tire, and 1 flex resin valve stem...$78.00 each set 
3D Printed PRC-77 vehicle mount stand alone set... $80.00 each
3D Printed Amplifer stand alone set...$100.00 each 
 3D Printed PRC-77 Radio and Amplifer set. Set includes the PRC-77 Radio and the Amplifier. The radio is a separate printing and is not built into the amp and can be removed like the real unit... $150.00 each set 
 
 3d printed PRC-77 Radio... $75.00 each 
           M151A2 Mutt complete wheel set. Set is designed to replace the 4 underscale wheels on the 21st Century Toys / The Ulitmate Soldier M151A2 Mutt. Set also Incudes the rear spare tire. Each Wheel consists of a 3D Printed Hub, Flex Resin Valve stem, and a Cast rubber Tire...$128.50 each set 
 
 
 
Single M151A2 Wheel. Wheel is comprised of three parts. 1 3D Printed hub, 1 cast rubber tire, and 1 flex resin valve stem...$58.00 each
M151A2 Mutt trailer wheel set. Set includes enough parts for 2 wheels that are inteded to upgrade the 21st Century toys M151A2 Trailer. Each Wheel is comprised of three parts. 1 3D Printed hub, 1 cast rubber tire, and 1 flex resin valve stem...$56.00 each set 
 
 
 
 M151A2 Spare tire. Spare tire is comprised of three parts. 1 3D Printed hub, 1 cast rubber tire, and 1 flex resin valve stem...$58.00 each
3D Printed late pattern M151 Mutt pedals set. Set includes the clutch / break cluster, and the late pattern "hook" accelerator pedal...$55.00 each set *note all pedal and parts will be printed in the HD material, compared to the standard material that is used on the prototypes in the images 
 
 
 3D Printed Early pattern M151 Mutt pedals set. Set includes the clutch / break cluster, and the early pattern "spoon" accelerator pedal...$55.00 each set *note all pedal and parts will be printed in the HD material, compared to the standard material that is used on the prototypes in the images
 
 3D Printed M151 series / GPW Jeep rear bumper set. Set includes 2 bumpers, enough for one M151 Mutt, or Jeep... $21.00 each set 
 
 3D Printed M151 series functional rear corner hook set. Set includes parts for 2 hooks, enough for one M151 Mutt... $25.00 each set *note the parts will be printed in the HD material, compared to the standard material that is used on the prototypes in the images 
3D Printed M151 series functional front bumper hook set. Set includes parts for 2 hooks, enough for one M151 Bumper... $25.00 each set *note the parts will be printed in the HD material, compared to the standard material that is used on the prototypes in the images 
 
  |
|
| Home1/6th scale1/35th scaleModel GalleryContactLinks | |