 | |
    3D Printed 50.cal Tombstone ammo can set. Set includes enough parts for 1 tombstone ammo can. The model is very detailed with all the external and internal detailing. These details include the rotating spool, opening top portion, functional lid securing clips, interior belt rollers, spool axle, exterior detailing, metal wire for a working handle, and pins for the main and clip hinges. The set is designed to work with all the ECA cradle mounts (shown in pictures *NOT INCLUDED* ), and just slips in place like the rear unit. There are two options, one with the wording embossed on the body and the second without... $65.00 each 
 
 
 
 
 
 
 
 
 HD 3D Printed 1/6th scale Federal Electric Type 160 24V Siren set. Set includes the siren body, inner propeller, distinctive V cover plate, and a length of wire. The unit is fully detailed with the fastener details, ID plate details, and power plug details...$50.00 each set 
 
 1/6th scale 3D Printed Sherman tank Family Dish Wheel set version 2. Set includes rim, zerk fitting, and the Cast Rubber tire. Enough parts for 1 road wheel...$36.00 each 
 1/6th scale 3D Printed Sherman tank family VVSS Late Dish wheel set. Set includes rim, zerk fitting, and the Cast Rubber tire. Enough parts for 1 road wheel...$36.00 each 
1/6th scale 3D Printed M4 Sherman family VVSS Final Drive set. Set includes 2 final Drives, 2 final drive top sections, and a set of printed fasteners...$65.00 each set 
 
 
 
 1/6th scale 3D printed late pattern M4 Sherman family rear tow hitch mount. This would be the pattern normally seen on very late production tanks and tanks upgraded in the post WWII period i.e the M4A3E8 Sherman. The set comes with all the details such as the welds swinging plate, metal chain, and retention pins... $50.00 each 
 1/6th scale 3D printed early pattern M4 Sherman family rear tow hitch mount... $45.00 each 
 1/6th scale 3D printed M4 Sherman tank Family functional lower hull escape hatch set. Set includes all the parts to assemble 1 functional escape hatch... $125.00 each set 
 1/6th scale HD 3D Printed MP-57 spring antenna base set. Set includes all the parts needed to assemble 1 MP-57 antenna base. This includes the spring and the antenna...$35.00 each set 
  1/6th scale New tooling HD 3D printed MP-37 spring antenna base set. Set includes all the parts needed to assemble 1 MP-37 spring antenna base. This includes the sping, and the antenna... $35.00 each set 
 
 1/6th scale 3D Printed WWII Jerry can holder set. Set includes a fully detailed WWII Jerry can holder, Brass Fasteners, Printed WWII Clasp, length of OD / Khaki webbing, and a strip of Aluminum for the strap end tab...$55.00 each set 
 1/6th scale USGI Jerry can 4 Pack. Set contains 4 Jerry cans, your choice of 2 Fuel cans, 2 Water cans, or 1 of each... $200.00 each pack 
 
 1/6th scale 3D Printed USGI Fuel jerry can 2 pack set. Set contains 2 Jerry cans, your choice of 2 Fuel cans, 2 Water cans, or 1 of each... $98.00 each pack
1/6th scale 3D pritned USGI Water jerry can. The Water can is fully detailed with all of the external details that would be present on the real unit. The can is printed hollow, and has a working cap. The Jerry can CAD file was designed a real USGI water jerry can that I have on hand in my collection so many of the subtle details that are on the real unit were brought into this model...$58.00 each
 
 1/6th scale 3D Printed USGI Fuel jerry can. The Fuel can is fully detailed with all of the external details that would be present on the real unit. The can is printed hollow, and has a removable cap. A length of chain is also supplied. The Jerry can CAD file was designed a real USGI jerry can that I have on hand in my collection so many of the subtle details that are on the real unit were brought into this model...$58.00 each 
 
 
 
 
 
 
 1/6th scale Metal 3D printed functional US AFV tow cable lock set. Set comes with enough parts to assemble two working tow cable lock (enough for 1 vehicle)... $65.00 each set 
 1/6th scale 3d Printed and wood US AFV tool set. Set contains the following parts in 3D print, the large spanner wrench, the sledge hammer head, pickaxe head, and the Axe head. The set also contains the following parts in non treated wood, the Sledge hammer handle, the pick ax handle, and the ax handle... $40.00 each set 
 
 1/6th scale M26 periscopes HD 3D printed / metal Open or closed "Super set". Set includes 5 3D printed US AFV periscopes in either the open or closed position and 5 metal brush guards. The periscopes are rendered in the open position complete with prism details and outer cover details, the untits that are printed in the closed state have the same cover cap and return spring details. The open periscopes are printed in translucent HD 3D print, while the closed units are in opaque HD printed resin. The set also comes with 5 metal 3D printed brush guards, the guards are a plug in installation. You can choose between all open, all closed or a mix of the two, your choice... $240.00 Each set 
 1/6th scale 3D US AFV external telephone box kit. Kit contains all 3D printed components which includes a fully functional front door, opening handle, HD translucent indication light, power cable inlet cover cap. The unit also has full interior detailing which includes a HD 3D printed handset, the control knobs, handset hookup, inner lid weather strip detailing, fastener detailing, prewelded mounting bosses, and functional door locks. Set also includes the power cable wiring and several springs for the other fitting details... $105.00 each set 
 
 1/6th scale 3D printed US AFV armored first aid container style 2. This set is designed to be fully functional. This is the version with the dual mounting arms that run along the side portions of the container. Set contains all the latch and hinge components along with the hardware to hinge everything together...$61.25 each set 
 
 1/6th scale 3D printed US AFV armored first aid container style 1. This set is designed to be fully functional. This is the version with 1 single mounting arm that runs along the center spine of the container. Set contains all the latch and hinge components along with the hardware to hinge everything together...$61.25 each set 
 1/6th scale HD 3D printed US AFV closed periscope set.Set includes 4 closed periscopes (enough for 1 sherman tank). The sets have all fastener, spring, hinge, and brush guard details printed on the surface...$65.00 each set 
 1/6th scale HD 3D printed US AFV open periscope set. Set includes 4 open periscopes (enough for 1 sherman tank). The sets have all fastener, spring, hinge, and brush guard details printed on the surface...$65.00 each set 
1/6th scale 3D printed VVSS spare track rack set. Set includes enough parts to assemble 2 track racks. Enough for 1 M4A3 / M4A1 sherman tank. Spare track links not inluded...$42.10 each set 
1/6th scale 3D printed Comb brake device style 1, retracting self contained pattern standard, $15.70 each HD Printed, $20.00 each 
 1/6th scale 3D Printed static comb device Style 2, full weld version standard, $15.70 each HD Printed, $20.00 each 
 1/6th scale 3D Printed static comb device Style 2, Partial weld version standard, $15.70 each HD Printed, $20.00 each 
 1/6th scale 3D Printed comb device Style 3, rod iron with full weld version standard, $15.70 each HD Printed, $20.00 each 
 1/6th scale 3D Printed comb device Style 3, rod iron with partial weld version standard, $15.70 each HD Printed, $20.00 each 
 1/6th scale 3D printed Comb brake device style 4, retracting segmented pattern standard, $15.70 each HD Printed, $20.00 each 
 1/6th scale HD 3D printed US AFV Fluid ID plates set. Set includes enough plates for 1 US tank... $21.00 each set 
 1/6th scale HD 3D printed functional US AFV tow cable lock set. Set comes with enough parts to assemble two working tow cable lock (enough for 1 vehicle). Set is designed to be snap together assembly... $21.00 each set 
1/6th scale HD 3D printed m2hb 50.cal flash supressor...$20.00 each 
 
1/6th scale 3D printed M-79 telescope mount.
Unit is printed in HD material and includes a
cast rubber eye cup...$25.00 each 3D Printed US AFV Bow Headlights set. Sets include and hollow headlight and block out light bases. Also included are clear printed headlight lenses and blackout lens faces. Sets are designed to have LEDs or bulbs fitted for functional use. (electronics not included)...$40.00 each set 
 3D printed M10 turret ammo racks set. Set includes the racks and the tie down strap mounts. Each set is enough for one M10 Tank destroyer...$45.00 each set 
 
 3D Printed functional US AFV heavy tow hitch set. Set includes the tow hitch, moutning castle nut, chain, and retention pins...$35.00 each 
 3D Printed M4 Sherman family Front hull brush guards set. Set includes the two headlight brush guards and the Horn brush guard...$35.00 each set 
 3D printed US AFV periscope guards. There are two options, standard material and HDbr /> Standard material...$16.00 each HD material...$19.00 each 
New tooling resin M4 Sherman family rear idler mounts set. Set includes two idler mounts Kit form....$50.00 each set Pre built....$70.00 each set 
Resin M4 Sherman Mid production / late production stamped rear idler wheel set. Set includes two idler wheels and two hub caps...$45.00 eack set. 
Resin M4 Sherman reversable plated over spoke road wheel. This version has oval plates welded over the spoke holes on one side and square plates welded over the spoke holes on the reverse side...$15.00 each. 
 Resin M4 sherman spoke wheel version 2...$15.00 each. 
 Resin M2HB symetrical five hole barrel support conversion. Conversion is designed for the Dragon M2HB plastic kit. Dragon kit is NOT included...$5.50 each. 
Resin M2HB early short barrel conversion set. Set is designed for the Dragon 1/6th scale M2HB plastic kit. Dragon kit is NOT included. Set includes one slotted barrel support and one short barrel...$10.50 each set. 
 Resin M4 
 Resin M2HB slotted barrel support conversion. Conversion is designed to replace the holed barrel support on the Dragon M2HB kit. Dragon kit is NOT included....$5.00 each.
New tooling flexible resin MP-65 vehicular mast base set. Set includes one antenna base and one antenna...$9.50 each 
 Metal M-10 rear tail light brush guards set.....$10.50 each 
 M10 3 inch / 76mm ammunition set. Set includes 2 shot APC M62, 2 shot AP M79, 2 shell M42...$25.00 each set 
 Late M10 turret detail set. Set includes 3 resin lift hooks, 1 resin turret brace, 7 folding foul weather tarpaulin braces.....$20.00 each set 
 Resin pre welded M10 main gun travel lock....$8.50 each 
 Resin M4A2/ M10 dual exhaust manifold kit...$25.00 each 
 Resin M10 main gun accessory set. Set includes 1 spare periscope box, 4 turret stowage boxes, 1 turret transverse gearbox with hand wheel, 2 turret vise locks, 1 main gun vertical travel lock with mount, and 1 turret elevation threaded rod with mount.....$30.00 each set. 
 Resin M10 rear turret 50.cal pintle mount...$7.50 each 
 Resin and metal M10 3-inch gun pre built and primed...$400.00 each 
 Resin and metal M10 3- inch gun kit...$250.00 each kit 
 M10/ M36 Jackson front hatch set. Set includes 2 hatches with hinges and fittings....$25.00 each set 
Resin M4 Sherman family engine grill hinge set. Set comes with 4 hinges....$8.50 each set  Resin M10/ M36 pre welded hull armored ring set....$25.00 each 
 Resin M10/ M36 Jackson hull and turret pre welded hard point set. Set includes 40 mounts with 40 bolts and washers....$50.00 each set. 
Metal foul weather drivers hood rack....$20.00 each 
Metal folding M10 / M36 Jackson front fenders set...$250 each set. 
Resin US SRC-508 radio kit....$45.00 each kit  
 Resin M4 Sherman tank family interior transmission housing kit....$150.00 each 
Resin M4 Sherman family transmission accessory set. Set includes 1 resin driveshaft shroud, 2 driver control levers, 1 driver control lever bracket, 1 clutch pedal, 1 clutch pedal bracket, 1 gas pedal, 1 gas pedal bracket, 3 transmission clevises, and 1 control lever floor plate template...$55.00 each set 
Resin M4 Sherman rear sponson access caps set. Set includes two caps.....$4.50 each set. 
Resin M4 Sherman and M3 Lee early spoke idler wheel set. Set includes two idler wheels and two hub caps....$30.00 each set 
Resin M4 Sherman VVSS idler wheel hub caps set. Set includes 2 resin caps....$5.50 each set 
Resin M10 hull lift hooks set. Set includes two front and two rear lift hooks....$9.50 each set 
Resin late Sherman VVSS dish wheel....$20.00 each 
M3 Lee / M4 Sherman early spoke wheel....$15.00 each 
Resin M10 hull sponson ammunition bulkhead set. Set includes 6 large bulkheads and 8 interloven ammo racks....$55.00 each set 
M4 Sherman VVSS track grousers set. Set includes 6 track grousers....$25.00 each set 
Resin M4 Sherman family reclining seat with springs fully assembed set. Set includes 2 fully assembled seats with counter weight springs...$85.00 
Resin M4 Sherman family reclining seat kit. Kit includes components for two seats and seat mounts. $60.00 each kit $75.00 pre assembled 
 Resin US AFV basic seat kit. Kit inclues components for two seats.....$25.00 each kit 
Resin US AFV folding seat kit set. Set includes enough components to assemble 3 folding seats. Seats will work on M10, M7 Priest, M4 Sherman 75/76, M8 HMC, M8 Greyhound, M20....$25.00 each set 
Resin M4 Sherman tank family rear firewall oil radiator kit.....$10.50 each 
Resin M4 Sherman family dash board kit. Dash board is designed to be used with the decal set from Johns Stuff...$9.50 each set 
Resin US AFV spare periscope box set. Set includes 3 resin boxes...$8.50 each set 
Resin US AFV tow hitch extender, Tow hitch and tow hitch mount not included....$9.00 each 
Resin US AFV tow cable cleat......$1.75 each 
Resin Sherman family front transmission cover rivet strip....$12.50 each 
Resin Sherman family fire extinguisher box kit .....$9.50 each 
Wood and brass folding gun cleaning kit. Set comes painted and treated.....$18.00 each 
One piece transmission style M4 Sherman metal front mud flap support set, mud flap not included......$9.00 each 
Resin "Insta Weld" weld beads set Set Includes 1 foot of welds...$5.00 each foot each foot 
Resin US AFV funnel horn....$8.50  Fully assembled radio controlled MP48 spring antenna base. This component is ment to extend the radio range on any 1/6th scale RC US tank. *Note this component will not work with the stock RC M5 Stuart electronics....$30.00 each 
 Resin 50.cal scope kit. Kit includes 1 scope and 1 scope mount.....$5.00 each 
Fully assembled resin MP48 spring antenna base. (Soft skin armor version, includes external insulators)...$11.50 each 
Fully assembled resin MP-48 spring antenna base.........$10.50 each 
 |
|
| Home1/6th scale1/35th scaleModel GalleryContactLinks | |
