1/6th scale 3D printed late pattern M4 Sherman family rear tow hitch mount. This would be the pattern normally seen on very late production tanks and tanks upgraded in the post WWII period i.e the M4A3E8 Sherman. The set comes with all the details such as the welds swinging plate, metal chain, and retention pins... $50.00 each




1/6th scale 3D printed early pattern M4 Sherman family rear tow hitch mount... $45.00 each





1/6th scale HD 3D Printed MP-57 spring antenna base set. Set includes all the parts needed to assemble 1 MP-57 antenna base. This includes the spring and the antenna...$35.00 each set



1/6th scale New tooling HD 3D printed MP-37 spring antenna base set. Set includes all the parts needed to assemble 1 MP-37 spring antenna base. This includes the sping, and the antenna... $35.00 each set



1/6th scale 3D Printed WWII Jerry can holder set. Set includes a fully detailed WWII Jerry can holder, Brass Fasteners, Printed WWII Clasp, length of OD / Khaki webbing, and a strip of Aluminum for the strap end tab...$55.00 each set  



1/6th scale USGI Jerry can 4 Pack. Set contains 4 Jerry cans, your choice of 2 Fuel cans, 2 Water cans, or 1 of each... $200.00 each pack





can options, select one

1/6th scale 3D Printed USGI Fuel jerry can 2 pack set. Set contains 2 Jerry cans, your choice of 2 Fuel cans, 2 Water cans, or 1 of each... $98.00 each pack





can options, select one

1/6th scale 3D pritned USGI Water jerry can. The Water can is fully detailed with all of the external details that would be present on the real unit. The can is printed hollow, and has a working cap. The Jerry can CAD file was designed a real USGI water jerry can that I have on hand in my collection so many of the subtle details that are on the real unit were brought into this model...$58.00 each




1/6th scale 3D Printed USGI Fuel jerry can. The Fuel can is fully detailed with all of the external details that would be present on the real unit. The can is printed hollow, and has a removable cap. A length of chain is also supplied. The Jerry can CAD file was designed a real USGI jerry can that I have on hand in my collection so many of the subtle details that are on the real unit were brought into this model...$58.00 each












1/6th scale HD Metal 3D Printed functional 50.cal travel lock kit. Kit contains all parts to assemble 1 retracting 50.cal pintle mount...$65.00 each set



1/6th scale Metal 3D printed functional US AFV tow cable lock set. Set comes with enough parts to assemble two working tow cable lock (enough for 1 vehicle)... $65.00 each set



1/6th scale 3d Printed and wood US AFV tool set. Set contains the following parts in 3D print, the large spanner wrench, the sledge hammer head, pickaxe head, and the Axe head. The set also contains the following parts in non treated wood, the Sledge hammer handle, the pick ax handle, and the ax handle... $40.00 each set



1/6th scale 3D printed Comb brake device style 1, retracting self contained pattern

standard, $15.70 each
HD Printed, $20.00 each



material options, pick one

1/6th scale 3D Printed static comb device Style 2, full weld version

standard, $15.70 each
HD Printed, $20.00 each



material options, pick one

1/6th scale 3D Printed static comb device Style 2, Partial weld version

standard, $15.70 each
HD Printed, $20.00 each


material options, pick one

1/6th scale 3D Printed comb device Style 3, rod iron with full weld version

standard, $15.70 each
HD Printed, $20.00 each



material options, pick one


1/6th scale 3D Printed comb device Style 3, rod iron with partial weld version

standard, $15.70 each
HD Printed, $20.00 each



material options, pick one

1/6th scale 3D printed Comb brake device style 4, retracting segmented pattern

standard, $15.70 each
HD Printed, $20.00 each



material options, pick one

1/6th scale HD 3D printed US AFV Fluid ID plates set. Set includes enough plates for 1 US tank... $21.00 each set



1/6th scale HD 3D printed functional US AFV tow cable lock set. Set comes with enough parts to assemble two working tow cable lock (enough for 1 vehicle). Set is designed to be snap together assembly... $21.00 each set





1/6th scale HD 3D printed  m2hb 50.cal flash supressor...$20.00 each


1/6th scale 3D printed M-79 telescope mount. Unit is printed in HD material and includes a cast rubber eye cup...$25.00 each




3D Printed US AFV Bow Headlights set. Sets include and hollow headlight and block out light bases. Also included are clear printed headlight lenses and blackout lens faces. Sets are designed to have LEDs or bulbs fitted for functional use. (electronics not included)...$40.00 each set



3D printed M3 Lee / bracketed rear tail light set. Set includes 2 hollow printed US AFV tail light cups w/ details and 2 clear HD material cat eye lenses. Being hollow the sets can be modded for lighted model use. Lighting equipment NOT included...$38.00 each set



3D Printed functional US AFV heavy tow hitch set. Set includes the tow hitch, moutning castle nut, chain, and retention pins...$35.00 each




Resin M4 Sherman family T44 Track links set. Track is designed to work with the Panzerwerks VVSS sherman sprocket and the Plastic Panzers early VVSS sherman sprocket. Set comes with enough track links to assemble one sherman tank. Links are NOT DRILLED and pre cut steel rods are NOT INCLUDED...$300.00 Each Set



Resin M4 Sherman family T44 Track links complete set. Track is designed to work with the Panzerwerks VVSS sherman sprocket and the Plastic Panzers early VVSS sherman sprocket. Set comes with enough track links to assemble one sherman tank. Links are all pre drilled and pre cut steel rods are included...$400.00 Each Set




New tooling resin M4 Sherman family rear idler mounts set. Set includes two idler mounts

Kit form....$50.00 each set

Pre built....$70.00 each set


Resin M4 Sherman Mid production / late production stamped rear idler wheel set. Set includes two idler wheels and two hub caps...$45.00 eack set.



Resin M4 Sherman reversable plated over spoke road wheel. This version has oval plates welded over the spoke holes on one side and square plates welded over the spoke holes on the reverse side...$15.00 each.




Resin M4 sherman spoke wheel version 2...$15.00 each.



Resin M2HB symetrical five hole barrel support conversion. Conversion is designed for the Dragon M2HB plastic kit. Dragon kit is NOT included...$5.50 each.



Resin M2HB early short barrel conversion set. Set is designed for the Dragon 1/6th scale M2HB plastic kit. Dragon kit is NOT included. Set includes one slotted barrel support and one short barrel...$10.50 each set.


 

Resin M4 Sherman VVSS bogie detail dress up kit. Kit is designed to up detail other manufacturers 1/6th scale VVSS bogies (Plastic Panzers, JD...ect.). If using ECA VVSS suspension kit this upgrade set is not needed. Kit contains enough components to upgrade six VVSS bogies (one complete Sherman tank)....$100.00 each kit.

 

Resin M2HB slotted barrel support conversion. Conversion is designed to replace the holed barrel support on the Dragon M2HB kit. Dragon kit is NOT included....$5.00 each. 


Resin M4 Sherman exhaust manifold kit. This kit will work on early M4, M4A1, M3 Lee, and M7 Priest...$25.00



Fully assembled radio controlled MP48 spring antenna base. This component is ment to extend the radio range on any 1/6th scale RC US tank. *Note this component will not work with the stock RC M5 Stuart electronics....$30.00 each



Resin M4 Sherman tank family interior transmission housing kit....$150.00 each



Resin M4 Sherman family transmission accessory set. Set includes 1 resin driveshaft shroud, 2 driver control levers, 1 driver control lever bracket, 1 clutch pedal, 1 clutch pedal bracket, 1 gas pedal, 1 gas pedal bracket, 3 transmission clevises, and 1 control lever floor plate template...$55.00 each set



Functional resin M3 Lee / Grant / M7 Priest front visor kit. Kit includes enough resin and metal components to assemble 1 hatch....$25.00



Resin M4 Sherman rear sponson access caps set. Set includes two caps.....$4.50 each set.



M4 Sherman horn brush guard.....$11.50 each



Metal M4 sherman head light brush guards set. Set includes two brush guards....$12.50



Resin M4 Sherman and M3 Lee early spoke idler wheel set. Set includes two idler wheels and two hub caps....$30.00 each set



Metal M3 Lee rear fender set. Set includes two rear fenders....$85.00 each set



Resin M3 Lee / early M4 Sherman rear hull engine hatch kit. Kit includes enough components for two hatches....$25.00 each set




Resin M3 Lee / early M4 sherman lower hull tow shackle set. Set includes 2 front shackles and 2 rear shackles...$9.50 each set



Metal VVSS M4 Sherman front fenders set. Set includes two fenders and two fender supports....$45.00 each set



Resin M4 Sherman VVSS idler wheel hub caps set. Set includes 2 resin caps....$5.50 each set



Resin M4 Sherman rear air filter canister set. Set includes enough components to build two air filter canisters. This set will work on the Viper sherman, M4A1, M7 Priest, M3 Lee/Grant, and M12 SPG

Unassembled Kit form....$55.00

Fully assembled....$100.00




Resin M4 Sherman hull lift hooks set. Set includes two front and two rear lift hooks....$9.50 each set




Resin late Sherman VVSS dish wheel....$20.00 each

MVC-025S.JPG (38146 bytes) MVC-026S.JPG (36746 bytes) MVC-027S.JPG (36405 bytes) MVC-028S.JPG (37826 bytes)

M3 Lee / M4 Sherman early spoke wheel....$15.00 each



Functional M3 Lee / early M4 Sherman light VVSS suspension set. Set includes enough components and hardware to assemble 6 bogie trucks....$350.00 each set




Functional M4 Sherman late production heavy VVSS suspension set version 2. Set includes enough components and hardware to assemble 6 bogie trucks.....$450.00 each set



Functional M4 Sherman late production heavy VVSS suspension set version 1. Set includes enough components and hardware to assemble 6 bogie trucks.....$450.00 each set



Functional M4 Sherman mid production heavy VVSS suspension set version 2. Set includes enough components and hardware to assemble 6 bogie trucks.....$450.00 each set



Functional M4 Sherman mid production heavy VVSS suspension set version 1. Set includes enough components and hardware to assemble 6 bogie trucks.....$450.00 each set



Functional M4 Sherman early production heavy VVSS suspension set version 2. Set includes enough components and hardware to assemble 6 bogie trucks.....$450.00 each set



Functional M4 Sherman early production heavy VVSS suspension set version 1. Set includes enough components and hardware to assemble 6 bogie trucks.....$450.00 each set



M4 Sherman VVSS track grousers set. Set includes 6 track grousers....$25.00 each set



Metal M4 Sherman VVSS track duck bill plug on style extenders set. Extenders come pre painted flat black, each pack comes with enough units to equip one tank...$350 each set

*Note These Extenders will fit the Armortek tracks, but I have no guarantee on how they will perform, or will affect any wear on the tracks.



images courtesy Christopher Fry



Resin US AFV tow hitch extender. Tow hitch and tow hitch mount not included....$9.50 each

 

Resin M4 Sherman family reclining seat with springs fully assembed set. Set includes 2 fully assembled seats with counter weight springs...$85.00


Resin M4 Sherman family reclining seat kit. Kit includes components for two seats and seat mounts.

$60.00 each kit

$75.00 pre assembled


 

Resin US AFV basic seat kit. Kit inclues components for two seats.....$25.00 each kit



Resin US AFV folding seat kit set. Set includes enough components to assemble 3 folding seats. Seats will work on M10, M7 Priest, M4 Sherman 75/76, M8 HMC, M8 Greyhound, M20....$25.00 each set



Resin M4 Sherman tank family rear firewall oil radiator kit.....$10.50 each



Resin M4 Sherman family dash board kit. Dash board is designed to be used with the decal set from Johns Stuff...$9.50 each set



Resin US AFV spare periscope box set. Set includes 3 resin boxes...$8.50 each set



Resin US AFV funnel horn....$8.50



Resin 50.cal scope kit. Kit includes 1 scope and 1 scope mount.....$5.00 each


Resin "Insta Weld" Weld beads set Set Includes 1 foot of welds...$5.00 each foot



Resin US AFV tow hitch extender, Tow hitch and tow hitch mount not included....$9.00 each



Resin US AFV tow cable cleat......$1.75 each



Resin Sherman family front transmission cover rivet strip....$12.50 each



Resin Sherman family fire extinguisher box kit .....$9.50 each



M4 Sherman gun cleaning kit gold edition set. Set includes 5 fully stained and varnished wooden rods with machined brass and steel screw able end connectors...$75.00 each set



Wood and brass folding gun cleaning kit. Set comes painted and treated.....$18.00 each

MVC-030S.JPG (39083 bytes) MVC-031S.JPG (39454 bytes) MVC-032S.JPG (38361 bytes)

One piece transmission style M4 Sherman metal front mud flap support set, (mud flap not included).......$9.00 each

Mvc-010s.jpg (37234 bytes) MVC-053S.JPG (40607 bytes) MVC-054S.JPG (40544 bytes)


Home1/6th scale1/35th scaleModel GalleryContactLinks