1/6th scale HD 3D Printed MP-57 spring antenna base set. Set includes all the parts needed to assemble 1 MP-57 antenna base. This includes the spring and the antenna...$35.00 each set

1/6th scale New tooling HD 3D printed MP-37 spring antenna base set. Set includes all the parts needed to assemble 1 MP-37 spring antenna base. This includes the sping, and the antenna... $35.00 each set

1/6th scale 3d Printed and wood US AFV tool set. Set contains the following parts in 3D print, the large spanner wrench, the sledge hammer head, pickaxe head, and the Axe head. The set also contains the following parts in non treated wood, the Sledge hammer handle, the pick ax handle, and the ax handle... $40.00 each set

1/6th scale 3D printed M3 Lee functional fuel armored covers set. Set includes enough parts to assemble 5 functional fuel cover caps and interior fuel filler cap detailing. This set is designed for the M3 Lee with the riveted M3 Lee pattern armored cover hinge and chain retention clip. The set also includes a length metal chain, and a length of metal wire for the fuel cap wire handle, hinge cotter pin, and chain retention rings... $110.00 each set.

1/6th scale HD 3D printed US AFV Fluid ID plates set. Set includes enough plates for 1 US tank... $21.00 each set

1/6th scale HD 3D printed functional US AFV tow cable lock set. Set comes with enough parts to assemble two working tow cable lock (enough for 1 vehicle). Set is designed to be snap together assembly... $21.00 each set

3D printed M3 Lee / bracketed rear tail light set. Set includes 2 hollow printed US AFV tail light cups w/ details and 2 clear HD material cat eye lenses. Being hollow the sets can be modded for lighted model use. Lighting equipment NOT included...$38.00 each set

New tooling resin M4 Sherman family rear idler mounts set. Set includes two idler mounts

Kit form....$50.00 each set

Pre built....$70.00 each set

Kit Form $50.00 Pre assembled $70.00

Resin M4 Sherman Mid production / late production stamped rear idler wheel set. Set includes two idler wheels and two hub caps...$45.00 eack set.

Fully assembled radio controlled MP48 spring antenna base. This component is ment to extend the radio range on any 1/6th scale RC US tank. *Note this component will not work with the stock RC M5 Stuart electronics....$30.00 each

Resin M4 Sherman reversable plated over spoke road wheel. This version has oval plates welded over the spoke holes on one side and square plates welded over the spoke holes on the reverse side...$15.00 each.

Resin M4 sherman spoke wheel version 2...$15.00 each.

Resin 11/54th diameter rivet heads set. Set Includes 85 rivet heads....$9.50 each set.

Resin 5/32nd diameter rivet heads set. Set includes 85 rivet heads....$9.50 each set.

Resin 37mm M5/M6 Gun Barrel kit. Kit contains barrel and barrel jacket, kit will work on M3 Lee/Grant, M3 Stuart, M5 Stuart series, and LVT (A)1 Amtank....$19.00 Each

M3 Lee/Grant side hatch door kit. Kit includes enough components for two doors, and two vision ports....$65.00 Each.

M3 Lee "Tea Cup" antenna base mount. Spring antenna bases not included...$9.50 each

M3 Lee/Grant fire extinguisher cluster set. Set will work on M3 Lee/Grant series of tanks. Set includes enough components for one tank....$9.50 each set

M3 Lee 75mm gun flange ring counter weight kit...$9.50 each

Early US AFV headlight set. Set will work on most early war period US armored vehicles including the M3 Lee series , M3 Grant, M3 Stuart Series, and M6 Heavy tank. Set includes enough components to assemble two complete head light clusters.....$20.00 each set.

M3 Lee/Grant metal front fender set. Set includes both left and right fenders...$150.00 each set

Functional resin M3 Lee/Grant small visor kit. Kit includes enough components to assemble one visor...$9.50 each.

Resin M3 Lee/Grant bow dual 30.cal MG mount kit. Kit includes 1 mount and two 30.cal barrel stubs....$9.50 each kit.

Resin M4 Sherman exhaust manifold kit. This kit will work on early M4, M4A1, M3 Lee, and M7 Priest...$25.00

Functional resin M3 Lee / Grant / M7 Priest front visor kit. Kit includes enough resin and metal components to assemble 1 hatch....$25.00

Metal M3 Lee rear fender set. Set includes two rear fenders....$85.00 each set

Resin M3 Lee / early M4 Sherman rear hull engine hatch kit. Kit includes enough components for two hatches....$25.00 each set

Resin M3 Lee / early M4 sherman lower hull tow shackle set. Set includes 2 front shackles and 2 rear shackles...$9.50 each set

Resin M4 Sherman rear air filter canister set. Set includes enough components to build two air filter canisters. This set will work on the Viper sherman, M4A1, M7 Priest, M3 Lee/Grant, and M12 SPG

Unassembled Kit form....$55.00

Fully assembled....$100.00

Kit Form $55.00 Pre assembled $100.00

Resin M4 Sherman rear sponson access caps set. Set includes two caps.....$4.50 each set.

Resin M4 Sherman and M3 Lee early spoke idler wheel set. Set includes two idler wheels and two hub caps....$30.00 each set

Resin M4 Sherman VVSS idler wheel hub caps set. Set includes 2 resin caps....$5.50 each set

M3 Lee / M4 Sherman early spoke wheel....$15.00 each

Functional M3 Lee / early M4 Sherman light VVSS suspension set. Set includes enough components and hardware to assemble 6 bogie trucks....$350.00 each set

M4 Sherman VVSS track grousers set. Set includes 6 track grousers....$25.00 each set

Resin US AFV funnel horn....$8.50

Fully assembled resin MP48 spring antenna base. (Soft skin armor version, includes external insulators)...$11.50 each

Fully assembled resin MP-48 spring antenna base.........$10.50 each