 | |
    1/6th scale 3D printed late pattern M4 Sherman family rear tow hitch mount. This would be the pattern normally seen on very late production tanks and tanks upgraded in the post WWII period i.e the M4A3E8 Sherman. The set comes with all the details such as the welds swinging plate, metal chain, and retention pins... $50.00 each 
 1/6th scale 3D printed early pattern M4 Sherman family rear tow hitch mount... $45.00 each 
 1/6th scale 3D Printed M4A3 lower hull engine hatch functional complete set. This hatch is found on any Ford GAA V8 sherman tank, tanks like the M4A3, M4A3E2 Jumbo, M4A3E8, M4A3(105), M36 Jackson, M7A1 priest...etc. The set is full detail with exterior and interior detailing and is functional. The hatch is a single printing with the hinges handel, interior / exteror welds, interior box frame, and rear aligner, and outer hinges inegerally printed. The set also includes the outer hinges hinge pins and the mounting hex head bolt details... $75.00 each 
       1/6th scale 3D Printed M4A3 lower hull engine hatch simple set. This hatch is found on any Ford GAA V8 sherman tank, tanks like the M4A3, M4A3E2 Jumbo, M4A3E8, M4A3(105), M36 Jackson, M7A1 priest...etc. The set is exterior detailing only and is non functional. The hatch is a single printing with the hinges printed solid. This set is fully detailed with all the exterior details such as the hinges, hinge pins, welds, handel, mounting fastener heads, and mounting plate details... $50.00 each
1/6th scale 3D printed M4 Sherman tank Family functional lower hull escape hatch set. Set includes all the parts to assemble 1 functional escape hatch... $125.00 each set 
 1/6th scale HD 3D Printed MP-57 spring antenna base set. Set includes all the parts needed to assemble 1 MP-57 antenna base. This includes the spring and the antenna...$35.00 each set 
  1/6th scale New tooling HD 3D printed MP-37 spring antenna base set. Set includes all the parts needed to assemble 1 MP-37 spring antenna base. This includes the sping, and the antenna... $35.00 each set 
 
 1/6th scale 3D Printed WWII Jerry can holder set. Set includes a fully detailed WWII Jerry can holder, Brass Fasteners, Printed WWII Clasp, length of OD / Khaki webbing, and a strip of Aluminum for the strap end tab...$55.00 each set 
 1/6th scale USGI Jerry can 4 Pack. Set contains 4 Jerry cans, your choice of 2 Fuel cans, 2 Water cans, or 1 of each... $200.00 each pack 
 
 1/6th scale 3D Printed USGI Fuel jerry can 2 pack set. Set contains 2 Jerry cans, your choice of 2 Fuel cans, 2 Water cans, or 1 of each... $98.00 each pack
1/6th scale 3D pritned USGI Water jerry can. The Water can is fully detailed with all of the external details that would be present on the real unit. The can is printed hollow, and has a working cap. The Jerry can CAD file was designed a real USGI water jerry can that I have on hand in my collection so many of the subtle details that are on the real unit were brought into this model...$58.00 each
 
 1/6th scale 3D Printed USGI Fuel jerry can. The Fuel can is fully detailed with all of the external details that would be present on the real unit. The can is printed hollow, and has a removable cap. A length of chain is also supplied. The Jerry can CAD file was designed a real USGI jerry can that I have on hand in my collection so many of the subtle details that are on the real unit were brought into this model...$58.00 each 
 
 
 
 
 
 
 1/6th scale HD Metal 3D Printed functional 50.cal travel lock kit. Kit contains all parts to assemble 1 retracting 50.cal pintle mount...$65.00 each set 
 1/6th scale Metal 3D printed functional US AFV tow cable lock set. Set comes with enough parts to assemble two working tow cable lock (enough for 1 vehicle)... $65.00 each set 
 1/6th scale 3d Printed and wood US AFV tool set. Set contains the following parts in 3D print, the large spanner wrench, the sledge hammer head, pickaxe head, and the Axe head. The set also contains the following parts in non treated wood, the Sledge hammer handle, the pick ax handle, and the ax handle... $40.00 each set 
 
 1/6th scale M26 periscopes HD 3D printed / metal Open or closed "Super set". Set includes 5 3D printed US AFV periscopes in either the open or closed position and 5 metal brush guards. The periscopes are rendered in the open position complete with prism details and outer cover details, the untits that are printed in the closed state have the same cover cap and return spring details. The open periscopes are printed in translucent HD 3D print, while the closed units are in opaque HD printed resin. The set also comes with 5 metal 3D printed brush guards, the guards are a plug in installation. You can choose between all open, all closed or a mix of the two, your choice... $240.00 Each set 
 1/6th scale 3D printed M4A3 Sherman functional fuel filler cover cap partial set Style 1. Set includes 3 standard armored covers, and 1 square bolt cover for the aux generator filler cap. The set also included pre welded hinges, retention pins, lengths of wire to fabricate the fuel filler cap handle and metal chain. This set will work on the Dragon M4A3, Armortek M4A3E8, Vantex M4A3, and M36B1 Jackson TD... $75.00 each set 
 1/6th scale 3D printed M4A3 Sherman functional fuel filler cover cap partial set Style 2. Set includes 4 armored covers, pre welded hinges, retention pins, lengths of wire to fabricate the fuel filler cap handle and metal chain. This set will work on the Dragon M4A3, Armortek M4A3E8, Vantex M4A3, and M36B1 Jackson TD... $75.00 each set 
1/6th scale 3D printed M4A3 Sherman functional fuel filler cover cap complete set Style 2. Set includes 4 inner fuel cap detail inserts, 3 standard armored covers, and 1 square bolt cover for the aux generator filler cap. The set also includes the pre welded hinges, retention pins, lengths of wire to fabricate the fuel filler cap handle and metal chain. This set will work on the Dragon M4A3, Armortek M4A3E8, Vantex M4A3, and M36B1 Jackson TD... $90.00 each set 
 1/6th scale 3D printed M4A3 Sherman functional fuel filler cover cap complete set Style 1. Set includes 4 inner fuel cap detail inserts, and 4 armored covers along with the pre welded hinges, retention pins, lengths of wire to fabricate the fuel filler cap handle and metal chain. This set will work on the Dragon M4A3, Armortek M4A3E8, Vantex M4A3, and M36B1 Jackson TD... $90.00 each set 
1/6th scale 3D printed M4 Sherman family side view mirror set. Set includes enough parts to assemble 2 pivoting side view mirrors, mounts and extra parts for spare use. The main body / pivoting parts are standard Nylon material and the lens mount is in HD material. Also included is a real miniature disc mirror to be inserted into the lens mount for realistic detailing. The units when assembled are designed to be able to pivot as they are on the real units...$40.00 each set 
  1/6th scale functional 3D Printed post WWII pattern M4A3 Sherman tank / M36 Jackson TD main gun travel lock set. Set is fully detailed and functional. Some of the functions include the working Post WWII barrel clamp, working barrel clamp locking system, working retract hinges and functional travel lock retention clip. The unit is fully detailed with both front and rear details... $102.00 each 
1/6th scale functional 3D Printed mid production M4A3 Sherman tank / M36 Jackson TD Main gun Travel lock set. Set is fully detailed and functional. Some of the functions include the working barrel clamps, working barrel clamp locking system, working retract hinges and functional travel lock retention clip. The unit is fully detailed with both front and rear details... $102.00 each 
  
1/6th scale 3D US AFV external telephone box kit. Kit contains all 3D printed components which includes a fully functional front door, opening handle, HD translucent indication light, power cable inlet cover cap. The unit also has full interior detailing which includes a HD 3D printed handset, the control knobs, handset hookup, inner lid weather strip detailing, fastener detailing, prewelded mounting bosses, and functional door locks. Set also includes the power cable wiring and several springs for the other fitting details... $105.00 each set 
 
 1/6th scale 3D printed Sherman tank bow MG canvas cover mount ring. The ring features the weld bead and tarpaulin snap connection point details. This is available in two material options HD and standard, choose your material below. Standard material, $23.00 each HD material, $27.00 each 
 1/6th scale 3D Printed US D90045 50 / 30 cradle mount kit. Kit includes enough parts to assemble 1 D90045 cradle mount. The mount is designed for use with either the M1919A4 .30 cal MG or the M2HB .50 cal. The kit is fully 3D printed and also contains metal chain and plastic rods...$85.00 each set 
 
 
 
 
 1/6th scale 3D printed US AFV armored first aid container style 2. This set is designed to be fully functional. This is the version with the dual mounting arms that run along the side portions of the container. Set contains all the latch and hinge components along with the hardware to hinge everything together...$61.25 each set 
 
 1/6th scale 3D printed US AFV armored first aid container style 1. This set is designed to be fully functional. This is the version with 1 single mounting arm that runs along the center spine of the container. Set contains all the latch and hinge components along with the hardware to hinge everything together...$61.25 each set 
 1/6th scale HD 3D Printed Sherman tank periscopes set. Set includes the two front Driver backup periscopes in thier retracted state and the Turret gunner's scope in it's open state...$31.00 each set 
1/6th scale HD 3D printed 75mm turret 50.cal receiver storage rack only...$36.00 each 
 1/6th scale HD 3D printed US AFV closed periscope set.Set includes 4 closed periscopes (enough for 1 sherman tank). The sets have all fastener, spring, hinge, and brush guard details printed on the surface...$65.00 each set 
 1/6th scale HD 3D printed US AFV open periscope set. Set includes 4 open periscopes (enough for 1 sherman tank). The sets have all fastener, spring, hinge, and brush guard details printed on the surface...$65.00 each set 
1/6th scale 3D printed VVSS spare track rack set. Set includes enough parts to assemble 2 track racks. Enough for 1 M4A3 / M4A1 sherman tank. Spare track links not included...$42.10 each set 
1/6th scale HD 3d Printed functional 50.cal travel lock kit. Kit contains all parts to assemble 1 retracting 50.cal pintle mount. Set is offered in two options, with weld bead details and without...$20.00 each set welded, 
 Non welded, 
 1/6th scale 3D Printed US AFV retracting Pedestal base set. Set includes enough parts to assemble 1 gun mount. The set also includes a cast rubber water plug, and metal chain...$20.00 each set 
 
 1/6th scale 3D printed Comb brake device style 1, retracting self contained pattern standard, $15.70 each HD Printed, $20.00 each 
 1/6th scale 3D Printed static comb device Style 2, full weld version standard, $15.70 each HD Printed, $20.00 each 
 1/6th scale 3D Printed static comb device Style 2, Partial weld version standard, $15.70 each HD Printed, $20.00 each 
 1/6th scale 3D Printed comb device Style 3, rod iron with full weld version standard, $15.70 each HD Printed, $20.00 each 
 1/6th scale 3D Printed comb device Style 3, rod iron with partial weld version standard, $15.70 each HD Printed, $20.00 each 
 1/6th scale 3D printed Comb brake device style 4, retracting segmented pattern standard, $15.70 each HD Printed, $20.00 each 
 1/6th scale HD 3D printed US AFV Fluid ID plates set. Set includes enough plates for 1 US tank... $21.00 each set 
 1/6th scale HD 3D printed functional US AFV tow cable lock set. Set comes with enough parts to assemble two working tow cable lock (enough for 1 vehicle). Set is designed to be snap together assembly... $21.00 each set 
1/6th scale HD 3D printed m2hb 50.cal flash supressor...$20.00 each 
 
1/6th scale 3D printed M-79 telescope mount.
Unit is printed in HD material and includes a
cast rubber eye cup...$25.00 each 3D Printed US AFV Bow Headlights set. Sets include and hollow headlight and block out light bases. Also included are clear printed headlight lenses and blackout lens faces. Sets are designed to have LEDs or bulbs fitted for functional use. (electronics not included)...$40.00 each set 
 3D Printed M4 sherman family rear tail light set. Set includes 2 M4 sherman pattern mounted tail light bases and two HD clear material tail light lenses (one left hand and one right hand unit). The bases are printed hollow and have 2 small hollow cavities printed through the base to allow wires to pass through for the ability to mount a bulb or and LED light (electronics not included)...$30.00 each set 
 3D Printed functional US AFV heavy tow hitch set. Set includes the tow hitch, moutning castle nut, chain, and retention pins...$35.00 each 
 3D Printed M4 Sherman family Front hull brush guards set. Set includes the two headlight brush guards and the Horn brush guard...$35.00 each set 
 3D printed US AFV periscope guards. There are two options, standard material and HDbr /> Standard material...$16.00 each HD material...$19.00 each 
3D printed / wood M4 sherman gun barrel cleaning staves set. Set comes fully assembled / painted... $90.00 each 
 
 3D Printed M4 sherman family rear tail light brush guard set. Set includes two guards, one Left hand and one Right hand unit, enough for one tank... Standard material, $16.00 each set HD material, $21.00 each set 
Resin M4 Sherman family T44 Track links set. Track is designed to work with the Panzerwerks VVSS sherman sprocket and the Plastic Panzers early VVSS sherman sprocket. Set comes with enough track links to assemble one sherman tank. Links are NOT DRILLED and pre cut steel rods are NOT INCLUDED...$300.00 Each Set 
 
 Resin M4 Sherman family T44 Track links complete set. Track is designed to work with the Panzerwerks VVSS sherman sprocket and the Plastic Panzers early VVSS sherman sprocket. Set comes with enough track links to assemble one sherman tank. Links are all pre drilled and pre cut steel rods are included...$400.00 Each Set
Late Sherman hull bow hatches set. Set is designed for late hull sherman tanks such as the following: late M4A3, late M4A1, M36B1 and late M4A2. Set includes enough components for two functional hatches. Inner periscope details are NOT included and are offered by panzerwerks ...$30.00 each set. 
 New tooling resin M4 Sherman family rear idler mounts set. Set includes two idler mounts Kit form....$50.00 each set Pre built....$70.00 each set 
Resin M4 Sherman Mid production / late production stamped rear idler wheel set. Set includes two idler wheels and two hub caps...$45.00 eack set. 
Resin M4 Sherman reversable plated over spoke road wheel. This version has oval plates welded over the spoke holes on one side and square plates welded over the spoke holes on the reverse side...$15.00 each. 
 Resin M4 sherman spoke wheel version 2...$15.00 each. 
 Resin M4A3 engine hatch stops set. Set includes two stops...$5.50 eash set 
Resin late M4A3 bow machine gun well kit. Well is designed to work with the Panzerwerk bow 30.cal machinegun set. Panzerwek MG ball is not included...$16.00 each kit....br /> 
 Late M4A3 Sherman tank headlight posts set. Set includes two pre welded head light posts, headlights not included. Set is designed for the late production M4A3 sherman tank (JD, Plastic Panzers, and Panzerwerks)...$5.50 each set  Functional folding resin and metal M4A3 Sherman tank exhaust grill complete set. Set includes metal exhaust deflector grill, resin rear hull extenders and exhaust deflector grill mounts Hard resin side hull extenders...$450.00 each set. Flexible resin side hull extenders...$456.00 each set. 
 
  Resin M4A3 Sherman tank rear hull extender and exhaust grill mounts set. Set includes hull extenders and grill mounts only, exhausts grill is not included. This set is intended for any GAA equipped M4 Sherman or Sherman derivative (M36, M4A3, M4A3E2 Jumbo...) Hard resin side hull extenders...$19.00 each set. Flexible resin side hull extenders...$25.00 each set.
Resin M4A3 Sherman exhaust stacks set. Set comes with two resin stacks and enough fasteners to mount stacks to the tank. This set is intended for any GAA equipped M4 Sherman or Sherman derivative (M36, M4A3, M4A3E2 Jumbo...)...25.00 each 
Resin M2HB symetrical five hole barrel support conversion. Conversion is designed for the Dragon M2HB plastic kit. Dragon kit is NOT included...$5.50 each. 
Resin M2HB early short barrel conversion set. Set is designed for the Dragon 1/6th scale M2HB plastic kit. Dragon kit is NOT included. Set includes one slotted barrel support and one short barrel...$10.50 each set. 
 Resin M4 
 Resin M2HB slotted barrel support conversion. Conversion is designed to replace the holed barrel support on the Dragon M2HB kit. Dragon kit is NOT included....$5.00 each.
New tooling flexible resin MP-65 vehicular mast base set. Set includes one antenna base and one antenna...$9.50 each 
Resin M3 90mm gun double baffle muzzle brake. Muzzle brake will work on M36 / M36B1 Jackson, and M26 Pershing...$25.00 each. 
Metal M-10 rear tail light brush guards set.....$10.50 each 
 Working metal M4A3 Sherman VVSS spare track racks set. Set includes 2 racks........$350 each  Resin M4 Sherman rear deck armored air intake....$9.50 
 M10/ M36 Jackson front hatch set. Set includes 2 hatches with hinges and fittings....$25.00 each set 
 Resin M10/ M36 pre welded hull armored ring set....$25.00 each 
 Resin M10/ M36 Jackson hull and turret pre welded hard point set. Set includes 40 mounts with 40 bolts and washers....$50.00 each set. 
Metal foul weather drivers hood rack....$20.00 each  Metal folding M10 / M36 Jackson front fenders set...$250 each set. 
 Resin US SRC-508 radio kit....$45.00 each kit  
 Resin M4 Sherman tank family interior transmission housing kit....$150.00 each 
Resin M4 Sherman family transmission accessory set. Set includes 1 resin driveshaft shroud, 2 driver control levers, 1 driver control lever bracket, 1 clutch pedal, 1 clutch pedal bracket, 1 gas pedal, 1 gas pedal bracket, 3 transmission clevises, and 1 control lever floor plate template...$55.00 each set 
Resin M4 Sherman and M3 Lee early spoke idler wheel set. Set includes two idler wheels and two hub caps....$30.00 each set 
 Metal VVSS M4 Sherman front fenders set. Set includes two fenders and two fender supports....$45.00 each set 
 Resin M4 Sherman VVSS idler wheel hub caps set. Set includes 2 resin caps....$5.50 each set 
 Resin M10 hull lift hooks set. Set includes two front and two rear lift hooks....$9.50 each set 
Resin M4 Sherman hull lift hooks set. Set includes two front and two rear lift hooks....$9.50 each set 
 Resin late Sherman VVSS dish wheel....$20.00 each 
 M3 Lee / M4 Sherman early spoke wheel....$15.00 each 
 Resin M10 hull sponson ammunition bulkhead set. Set includes 6 large bulkheads and 8 interloven ammo racks....$55.00 each set 
 Functional M4 Sherman late production heavy VVSS suspension set version 2. Set includes enough components and hardware to assemble 6 bogie trucks.....$450.00 each set 
 Functional M4 Sherman late production heavy VVSS suspension set version 1. Set includes enough components and hardware to assemble 6 bogie trucks.....$450.00 each set 
Functional M4 Sherman mid production heavy VVSS suspension set version 2. Set includes enough components and hardware to assemble 6 bogie trucks.....$450.00 each set 
Functional M4 Sherman mid production heavy VVSS suspension set version 1. Set includes enough components and hardware to assemble 6 bogie trucks.....$450.00 each set 
Functional M4 Sherman early production heavy VVSS suspension set version 2. Set includes enough components and hardware to assemble 6 bogie trucks.....$450.00 each set 
Functional M4 Sherman early production heavy VVSS suspension set version 1. Set includes enough components and hardware to assemble 6 bogie trucks.....$450.00 each set 
M4 Sherman VVSS track grousers set. Set includes 6 track grousers....$25.00 each set 
 Metal M4 Sherman VVSS track duck bill plug on style extenders set. Extenders come pre painted flat black, each pack comes with enough units to equip one tank...$350 each set *Note These Extenders will fit the Armortek tracks, but I have no guarantee on how they will perform, or will affect any wear on the tracks. 
images courtesy Christopher Fry 
 Resin M4 Sherman family reclining seat with springs fully assembed set. Set includes 2 fully assembled seats with counter weight springs...$85.00 
 Resin M4 Sherman family reclining seat kit. Kit includes components for two seats and seat mounts. $60.00 each kit $75.00 pre assembled 
 Resin US AFV basic seat kit. Kit includes components for two seats.....$25.00 each kit 
 Resin US AFV folding seat kit set. Set includes enough components to assemble 3 folding seats. Seats will work on M10, M7 Priest, M4 Sherman 75/76, M8 HMC, M8 Greyhound, M20....$25.00 each set 
 Resin M4 Sherman tank family rear firewall oil radiator kit.....$10.50 each 
 Resin M4 Sherman family dash board kit. Dash board is designed to be used with the decal set from Johns Stuff...$9.50 each set 
Resin US AFV spare periscope box set. Set includes 3 resin boxes...$8.50 each set 
Resin US AFV tow hitch extender, Tow hitch and tow hitch mount not included....$9.00 each 
Resin US AFV tow cable cleat......$1.75 each 
Resin Sherman family front transmission cover rivet strip....$12.50 each 
 Resin Sherman family fire extinguisher box kit .....$9.50 each 
Wood and brass folding gun cleaning kit. Set comes painted and treated.....$18.00 each 
Fully assembled radio controlled MP48 spring antenna base. This component is ment to extend the radio range on any 1/6th scale RC US tank. *Note this component will not work with the stock RC M5 Stuart electronics....$30.00 each 
 One piece transmission style M4 Sherman metal front mud flap support set, mud flap not included......$9.00 each 
Resin "Insta Weld" weld beads set Set Includes 1 foot of welds...$5.00 each foot 
Resin US AFV funnel horn....$8.50  Resin 50.cal scope kit. (Kit includes 1 scope and 1 scope mount).....$5.00 each 
 Fully assembled resin MP48 spring antenna base. (Soft skin armor version, includes external insulators)...$11.50 each 
Fully assembled resin MP-48 spring antenna base.........$10.50 each 
 |
|
| Home1/6th scale1/35th scaleModel GalleryContactLinks | |
