 | |
    HD 3D Printed King Tiger tank rear antenna well detail set. Set includes the triangular access cover cap, and several fasteners that are present in the rear hull antenna well location. The cover cap has the correct geometry, all fastener, and retention washer detailing present. The other fasteners have the washer, nut and stem detailing present as well. The are more fasteners than are required and are there for use as spares... $27.00 each set 
 3D Printed King Tiger rear grill covers full set. Set includes 4 radiator grill cover frames, 2 fan cover frames, metal mesh, and fasteners... $77.00 each set *Units are shown fitted to Armortek King tiger rear grillwork* *Assembled units in the image are pre production units, the production versions are improved with the detailing, which can be seen in the CAD images* 
 3D Printed King Tiger rear grill covers partial set. Set includes 4 radiator grill cover frames, metal mesh , and fasteners. Fan grill covers are NOT INCLUDED... $47.00 each set *Units are shown fitted to Armortek King tiger rear grillwork* *Assembled units in the image are pre production units, the production versions are improved with the detailing, which can be seen in the CAD images*
3D Printed King Tiger rear grill covers full set. Set includes 4 radiator grill cover frames, 2 fan cover frames, metal mesh, and fasteners... $77.00 each set *units are shown fitted to Armortek King tiger rear grillwork*
  
 3D Printed King Tiger rear grill covers partial set. Set includes 4 radiator grill cover frames, metal mesh , and fasteners. Fan grill covers are NOT INCLUDED... $47.00 each set *units are shown fitted to Armortek King tiger rear grillwork*
 Early Tiger I 3D printed rear hull mounted tool box. This component is a single print that includes the pre welded rack w/ the correct shape / details, tie down straps, and the toolbox w/ the hinge, strap and lock hinge detailing. The unit is depicted in the stowed state and is ready to mount with no assembly needed... $106.50 each 
3D Printed King Tiger / Jagdtiger front and rear mudflap lock detail set. Set includes two front and 2 rear non funcitonal mud flap details (enough for 1 King Tiger or Jagdtiger)...$26.00 each set 
 
  HD 3D printed Armortek King Tiger / jagdtiger front perisope face detail set. Set includes two detail faces for the the Armortek King Tiger / Jagdtiger kits...$29.00 
 3D printed King Tiger / Jadgtiger front headlight mount set...$26.00 each 
3D printed King tiger lower hull access panels set with real bolts. Set contains all the King tiger tank lower hull access caps and escape hatch. This set also includes the fasteners to secure the plates to the hull...$170.00 each set 3D printed King tiger lower hull access panels set with printed bolts. Set contains all the King tiger tank lower hull access caps and escape hatch. This set has the detail hex bolts printed on... $165.00 each set 3D Printed King tiger Tow C clamp mounts set. Set includes all printed and fasteners required to mount two C clamps to the rear of a King tiger / Jagdtiger. *Claws Not Included*...$41.50 
 3D Printed King Tiger Jack mounts set. Set supplies you with enough parts to mount a Jack to the King Tiger or a Jagtiger *Jack Not Included*....$44.50 each set 
 
 
 3D Printed King Tiger pattern Jack Block detail upgrade kit. upgrade kit contains all printed parts to mount / secure a Jack block to the rear section of a King Tiger / Jagdtiger. Also included are the details to add to the wood block, these would include the wood reinforcement straps, and carry handle. Also included are the fasteners. span class="auto-style1">*Wood Block NOT included*....55.00 each set 
 3D printed German AFV tubular convoy light / round reflector set. Set comes in two options, filterless / sleeveless, and with the filter. Both convoylight options come with a round reflector...$29.00 each set 
 
 3D Printed initial tiger I rear mudguard frame set. set includes two frames, and a single tubular convoylight mounting plate. Set is offered in both welded and non welded options...$50.00 each set Non welded 
 welded 
 3D Printed Tiger I rear hatch retaining hooks set. Set includes 3 complete hooks, enough for 1 Tiger I...$25.00 each set 
 3D Printed Tiger I engine hatch retracting legs set . Set contains enough parts for 2 retracting legs (enough for 1 Tiger I). Available in two material choices. Standard Material...$21.00 each set HD material...$25.00 each set 
 3D printed Tiger I bow MG cover cap / tarpaulin mounts set non weld bead version. Set include two unassembled mounts, enough for 1 tiger I. This set has weld bead detailing. Choice between two material choices. (Bow MG, cover cap, or tarpulin not included) Standard material...$23.00 each set HD material...$25.00 each set 
 3D printed Tiger I bow MG cover cap / tarpaulin mounts set weld bead version. Set include two unassembled mounts, enough for 1 tiger I. This set has weld bead detailing. Choice between two material choices. (Bow MG, cover cap, or tarpulin not included) Standard material...$23.00 HD material...$25.00 
 3D Printed Henschel king tiger rear escape hatch torsion bar guards set. Set includes 2 guards, enough for 1 King Tiger...$42.00 each set Welded version 
 not welded 
 >>PREORDER<< Functional 3D Printed King Tiger / Jagdtiger radiator / cooling fan cluster kit. Kit includes all the parts to assemble 2 complete cooling radiator clusters (enough for 1 King tiger or Jagdtiger). Sets include the following features All 3D printed parts 12V DC Brushless fans Left hand and right hand specific Radiator assemblies Left hand and right hand specific fan housing assemblies complete Interior / exterior detailing Hollow Radiator core fins Cooling tubing details included gasket detailing detailed Ductwork HD Printed top valves w/ hose clamp details ...$1,417.00 each set 
 
 
 1/6th scale 3D Printed German WWII Double fuel drum trailer kit... $840.50 each >>PRE ORDER AVAILABE NOW<< Kit includes the following features All 3D Printed construction Cast Rubber tires Rolling wheels Complete under chassis / frame detailing fasteners Rubber hose drum clamps Fuel drum spout Fits 2 german WWII fuel drums *NOT INCLUDED*will work with both the Dragon metal fuel drum or the "chinesium" ali express drum*NOT INCLUDED* 
  D Printed German WWII single fuel drum trailer kit... $696.00 each Kit includes the following features All 3D Printed construction Cast Rubber tires Rolling wheels Complete under chassis / frame detailing fasteners Rubber hose drum clamps Fuel drum spout *NOT INCLUDED*will work with both the Dragon metal fuel drum or the "chinesium" ali express drum*NOT INCLUDED* *Note* the completed unit in the below images was the pre production sample. The production units will be improved from the one in the images 
 
 First pics of the Production unit! 
 
3D printed German AFV Functional latch kit. Set comes with 5 functional latches, pins and pad lock hook wire... $15.50 each set 
 3D Printed Tiger I rear Storage bin kit. All Parts are 3D printed, and are in kit form. Once assembled the lids and the latches are fully functional. Metal hardware is included for hingework... $280.00 each kit 
 
 
 
 
3D pritned Armortek Tiger I escape hatch detail insert set. Set is designed to add the missing detail on the inner portion of the Armortek tiger I eascape hatch. Insert has all the detailing for this part and the lock bar is functional. Mounting fasteners are included... $60.00 each set *Note the unit mounted on the escape hatch is a pre production sample. The production units are improved from this example 
 3D printed Tiger I Lower hull Fuel 3D printed Tiger I Lower hull Fuel tanks complete set. Set includes both left hand and right hand fuel tanks. Fuel tanks are hollow and have thier rear section details. Also inluded are the fuel tank straps, and the fuel line meeting points. All components are 3D printed... $300.00 each set. 
 
 3D printed Tiger I Lower hull Fuel tanks face detailing set. Set includes both left hand and right hand fuel tanks. Fuel tanks are hollow but the rear detail sections are not included. Also inluded are the fuel tank straps, and the fuel line meeting points. All components are 3D printed... $275.50 each set.
3D printed Armortek Tiger I pistol port cone fastener set...$22.50 each set 
 3D printed early Tiger I air intake set. Set includes enough parts for one air intake... $40.00 each set 
 
 3D Printed tiger I hatch cluster detail set. Set includes the access hatch and the filler cap plug...$25.00 each set 
 3D Printed Early Tiger I hatch lock set (exterior version). Set includes both main and backup hatch locks for the exterior of the model...$30.00 each set 
 3D Printed mid / late production Tiger I lock set (exterior version) Set includes main hatch locks for the exterior of the model...$20.00 each set 3D Printed Early Tiger I hatch lock complete set. Set includes main and backup hatch locks for the exterior of the model and the interior locking details...$70.00 each set
 
 3D Printed mid / late production Tiger I lock complete interior and exterior set. Set includes main hatch locks for the exterior of the model...$45.00 each set
3D Printed German AFV Side hull armored bolts set. Set includes 2 bolts. Standard material... $4.00 each set HD material... $6.00 each set 
 3D Printed Jagdpanzer L70 main gun barrel set. Barrel is designed to replace the stock barrel supplied with the FOA Jagdpanzer kit. Set includes the barrel and a PVC connection tube...$120.00 each set 
3D Printed Tiger I gas tank shroud / air intake set. Set includes a Left and Right hand air duct... $150.00 each set 
 
  3d Printed King Tiger road wheel hub bolt detail set. This set will replace the resin versions whuich have been on the site prior. Set includes enough components for one King Tiger along with spares. King Tiger Hubs *NOT INCLUDED*...$14.00 each set 
 
 Pre Assembled Metal King Tiger Bump Stop Set. Set includes 4 Pre assembled metal and resin bump stops (enough for 1 King tiger tank)... $270.00 each set 
 
 
 Resin German King TigerBump Stop set. Set Inclues enough parts to assemble 4 bump stops (enough for 1 King tiger tank)... $70.00 each set 
  
 Resin German First pattern firewall vent. This pattern of vent would have been present on the First 250 vehicles that were produced with the HL210 Engine...$6.50 each  Resin German Early Pattern Tiger I rear turret Air blower set. Set I designed for early Pattern Tigers (the late pattern set is listed below on this page). The set includes enough components for 1 early pattern tiger I turret...$12.50 each set 
 Resin German Tiger I Mantlet optic detail insert set. Set includes 2 optic inserts... 12.00 each set 
 New tooling Resin Early Tiger I hull mounted S mine canister set. Set includes enough parts to equip one early Tiger 1...$35.00 each set. 
 
 Resin German MG34 Machine Gun rear buffer tube detailing plug. Plug is designed to replace the stock on a Dragon MG34 MG, to depict the MG in a veicle mount with it's stock removed. MG Not included...5.50 each 
 Resin SDKFZ 222 side door box set. Set includes enough components to assemble two boxes...$40.00 each set. 
  Resin German AFV front armored visor covers set. Set includes two armored covers. *Side covers are NOT included...$6.00 Each set 
 Resin SDKFZ 222 Hollow Head light set. Set includes enough components for one 222 armored car. *Panzerwerk German AFV Siren NOT included... $25.00 each set 
 Resin SDKFZ 222 Exhaust muffler set. Set includes enough Mufflers, elbows, tubes, and armored covers for one 222 armored car...$20.00 each set 
 Resin 2cm kwk 30 Flak turret assistant gunner rear seat backrest kit. Kit contains all parts needed to assemble one seat backrest...$9.50 each kit 
  SDKFZ 222 armored car 2 cm KwK 30 flak gun cradle resin kit...$500.00
Kit is designed to be used with the 1/6th scale dragon 2cm flak gun and the Dragon MG34 (Not included). Kit contains lots of small resin metal and plastic parts and is for experienced modelers only! Due to all of the small parts required this kit will take longer to cast / prep compared to other parts and can add more time to complete when ordered. 
Resin German Late pattern Tiger I rear starter plate kit. Kit inculdes enough componets to assemble one starter plate. This version is designed for late pattern / production tiger I tanks...$20.00 each kit 
Resin German tank Late style air intake kit.
This component is found on later generation
german tanks including but not limited to the
Tiger I (late / mid) , King Tiger tanks, and the
Jagdpanther. Kit contains the bottom portion,
top lid, and slot screw fasteners...$9.00 each
kit Resin mid / Late style Tiger I engine hatch detail set. Set is deisnged for Mid / later period tiger I tanks. Set includes One Late style air intake...$14.00 each set 
 Resin Tiger I engine compartment exhaust cooling duct set. Set includes the ductwork, and two connector elbows (not pictured)...15.00 each set  Resin King Tiger complete exhust detail package set. Set includes exhaust stacks, exhaust armored covers, lift lugs, and crank handle guide...$109.00 
Resin King Tiger Armored exhaust covers set. Set includes two armored covers, a set of turned steel lift lugs, and the King tiger starter crank handle guide. Exhuast stack NOT Included...$50.00 Each set
Panther rear deck fuel breather set. Set comes with one resin breather, and one brass rod...$5.50 each. 
King tiger rear deck fuel breather vlaves set. Set includes 4 caps brass rods steel strips, and resin hex heads. One set is enough for one King Tiger...$20.00 each set 
 Resin Tiger I lower hull shock absorber detail plugs set. Set is designed to simulate the side hull shock absorbers mounting plug. Set is designed and is sized to work with the Armrotek tiger I kits, but will also work on any 1/6th scaled Tiger I tank... $6.00 each set. 
 German half track large front visors set. This set is intended for use on front two visors on german halftracks (250 alt / neu, 251 Alt / neu...etc) and other AFV. Set comes with both Left and Right hand units along with all parts to assemble them. *Masters By David Cueter ...$33.00 each set. 
German AFV canvas gun muzzle bag. Bags are hand made in the USA and are offered in three colors. Your choice of green, Dark gray, and Dark Yellow...$30.00 each. 
 
Resin Panther rear deck antenna base mount...$6.00 each 
 SDKFZ 222 armored car driver's instrument panel set. Set includes enough components to assemble one instrument panel. Gauge faces are also included...$15.50 each 
  SDKFZ 222 armored car radiator cluster set. Set includes enough components to assemble one radiator, and cooling fan cluster...$65.00 each set. 
 Resin German AFV interior non hinged periscope detail set. Set can be made to swivel, and comes with one clear resin vision block. Set is for the interior detailing only. Set includes enough components to assemble one mount. Set will work on most German armored cars / halftracks including, but not limited to the 222 armored car, 223 armored car, 234 Puma armored car, and 250 halftrack...$6.50 each set 
 Resin SDKFZ 222 armored car interior hand pump set. Set includes the hand pump components and the reservoir tank...$10.50 each set 
  SDKFZ 222 suspension hydraulic lube lines set. Set includes enough components to equip one 222 armored car...20.00 each set 
 SDKFZ 222 armored car break line set. Set includes both hand break and pulley break resin and metal components...$20.00 each set. 
 Resin SDKFZ 222 armored car transmission housing set. Set includes Transmission housing, drive shafts, Drive shaft components, shifter rod and hand break components...$65.00 each set 
 
 Resin and metal SDKFZ 222 armored car suspension set. Set includes all resin and metal components to complete a functional and steerable 222 suspension. Many components are pre machined and pre drilled. Set also includes brass and nylon ball pivots. Set is not designed for RC use, road wheels are not included...$400.00 each set 
.JPG)
 
 Resin SDKFZ 222 armored car steering column set. Set includes enough components to assemble one complete steering column...$15.50 each 
 Resin SDKFZ 222 armored car differential set. Set includes enough components to equip one 222 armored car. basic kit...$50.00 each set drilled and spinable...55.00 each set. 
 
 Maybach HL 230 P45 V12 engine with cyclone air filters Pre built Model. Each engine is custom built for order and is all hand built and painted.d painted. Unweathered...1,560.00 each 
 
 
 Weathered...$1,600.00 each 
 
 Maybach HL 230 P45 V12 engine with cyclone air filtration system engine bay detail insert kit. Kit is comprised of the top half of the engine and engine components. Kit is deigned to be placed in the rear portion of a tank to detail the engine bay, or to conceal any RC electronics...$460.00 each kit 
 Maybach HL 230 P45 V12 engine with cyclone air filtration system. complete kit. Kit contains over 80 resin and metal parts to assemble one HL230 Engine. Kit is designed for experienced modlers...$670.00 each kit. 
 
 Resin Tiger I grill fluid cap insert set. Set is designed as a drop in addition to any 1/6th scale tiger I to give them functional fuild cover caps. Set includes 2 fuel inserts, and two radiator fluid inserts...$20.00 each set 
 Wooden early German tank antenna channel. The channel is all hand made with both wood and metal components, and is patterned off of the DML PZII plastic channel. The channel also comes with several small brass micro fastners..$60.00 each 
 Dragon Panzer II running gear retention bushing system set. set is designed as a modification to the dragon Panzer II plastic kit's running gear. The set is intended to allow the running gear to spin freely, but will keep the wheels on securely. Set comes with enough componnets to equip one tank, this includes the sprockets, worad wheels, return rollers, and idler wheels. All machined components and fasteners are included...$65.00 each set 
 
 Resin early production Tiger I 88mm KwK 36 L/56 gun Muzzle brake...$25.00 
 Resin Tiger I 88mm barrel adapter ring plug...$15.00 each 
 Functional Tiger I front fender retaining latches set. Set includes enough components for two mounts...$6.50 each set 
 Tiger I snorkel bow MG cover cap set. Set includes one cover cap and one set of cover cap mounts...$15.00 each 
 New Tooling resin and PVC Tiger I telescoping snorkel set. Set includes all components to assemble a funcional retracting snorkel...$45.00 each set 
 
 Resin Tiger I rear grill work set style 1. Set includes all of the side grillwork/ fan hatches, and hatch retaining latches. Set includes enought components for one Tiger I...$250.00 each 
 
 Resin and metal HL210 Tiger I engine bay accessory set. Set contains resin and metal components to hook up the Maybach HL 210 in a tiger I engine Bay. Set includes fan gearbox, fan gearbox mounting equipment, Fan drive clutches, fan oil dip stick , radiator / cooling plumbing, electrical boxes, engine bay vents, control rods and hose clamps (many of the parts are not pictured), Snorkel equipment not included...$60.00 each set. 
 Resin and metal HL230 Tiger I engine bay accessory set. Set contains resin and metal components to hook up the Maybach HL 230 in a tiger I engine Bay. Set includes fan gearboxes, fan gearbox mounting equipment, fan oil dip stick , radiator / cooling plumbing, electrical boxes, engine bay vents, control rods and hose clamps (many of the parts are not pictured)...$60.00 each set. 
 Resin Tiger I static dummy torsion bar swing arm set. Set includes 16 pre drilled resin swing arms. Set is designed to dress up the hull of a static FOA tiger and are not designed to be functional...$54.00 each set. 
 Maybach HL 230 P45 V12 engine Pre built Model. Each engine is custom built for order and is all hand built and painted. Unweathered...$1,500.00 each 
 Weathered...$1,600.00 each 
 Maybach HL 210 P30 V12 engine pre built model. Each engine is custom built for order and is all hand built and painted. Unweathered...$1,500.00 each 
 Weathered...$1,600.00 Each 
 Maybach HL 230 P45 V12 engine complete kit. Kit contains over 80 resin and metal parts to assemble one HL230 Engine. These engines were common on Mid / Late production Tigers. Kit is designed for experienced modlers...$650.00 each kit. 
 Maybach HL 230 P45 V12 engine bay detail insert kit. Kit is comprised of the top half of the engine and engine components. Kit is deigned to be placed in the rear portion of a tank to detail the engine bay, or to conceal any RC electronics. These engines were common on Mid / Late production Tigers...$400.00 each kit 
 Completed pics courtesy James Tseliki *note This model maker made several modifications to the stock ECA kit, some of which are not included with the supplied kit. 
 Maybach HL 210 P30 V12 engine complete kit. Kit contains over 80 resin and metal parts to assemble one HL210 Engine. These engines were common on early production Tigers. Kit is designed for experienced modlers...$650.00 each kit. 
 Maybach HL 210 P30 V12 engine bay detail insert kit. Kit is comprised of the top half of the engine and engine components. Kit is deigned to be placed in the rear portion of a tank to detail the engine bay, or to conceal any RC electronics. These engines were common on early production Tigers...$400.00 each kit 
Functional Resin Tiger I cooling fan / radiator cluster kit. Kit includes enough components (including fans) to assemble one left hand and one right hand radiator cluster (enough for one complete Tiger I)...$500.00 each kit 
 
 Functional Resin Tiger I cooling fan / radiator cluster kit. Kit includes enough components (including fans) to assemble one left hand and one right hand radiator cluster (enough for one complete Tiger I)...$500.00 each kit Metal initial Tiger I rear mud flaps set A. Set is deigned for very early initial production Tigers without side fenders. Set includes two sheet steel mud flaps...$100.00 each set. 
 Resin early Tiger I wheels set. Set includes enough resin and metal components to equip one Tiger I...$750.00 each set. 
 
  Resin Tiger I torsion bar swing arm set. Set includes 16 pre drilled resin swing arms and 32 1/4 inch steel shafts...$88.00 each set.
Hand carved wood Schwimmwagen paddle. Untreated...$45.00 each Fully treated...$55.00 each 
 Turned wood German AFV shovel replacement handle. will work on Dragon, and Armorpax shovel handles. Untreated...$10.50 each Fully treated...$15.50 each 
 Resin King Tiger exhaust stack crank handle guide kit. Kit includes enough components to asemble one crank handle guide....$12.50 each. 
Steel rear King tiger exaust cover lift bolts set. Set includes 4 lift bolts.....$6.50 each set
Maybach HL 230 P45 V12 engine with cyclone air filtration system engine bay detail insert kit. Kit is comprised of the top half of the engine and engine components. Kit is deigned to be placed in the rear portion of a tank to detail the engine bay, or to conceal any RC electronics...$460.00 each kit
Resin King tiger exhausts set. Set includes enough components for one king tiger....$45.00 each set. 
Alluminum King Tiger suspension torsion bar cap set. Set includes two caps...$8.50 each set 
 Resin Jagdpanther / King tiger 8.8 cm KwK 43 gun adapter ring.....$15.00 each 
 Turned aluminum Panther U hook bosses set. Set includes 4 bosses....$30.00 each set 
 Resin Panther early idler wheel set. Set includes 2 idler wheels...$40.00 
 Fully assembled resin, brass, and vynel Panther road wheel bearing set. Set includes 16 pre assembled bearings.....$200.00 each set. 
Resin Panther suspension detail set. Set includes 4 dual bump stops, 2 single front bump stops, and 2 track pin aligner bumps.....$30.00 each set. 
 Resin Panther torsion bar set. Set includes 16 all resin torsion bars....$50.00 each set. 
Panther steel resin jacketed torsion bar set. Set includes 16 torsion bars....$150.00 each set. 
 SDKFZ 234 Puma replacement wheel hub cap set. Set includes 8 hub caps...$15.00 each set.  SDKFZ 234 Puma turret gunners sight...$9.50 each 
 SDKFZ 234/2 Puma turret hatch kit. Kit includes 2 hatches and hinge fittings.....$25.50 each kit 
 Resin SDKFZ 234/2 Puma muzzle brake.....$15.50 each. 
.JPG)
SDKFZ 234/2 Puma armored exhaust cover set. Set includes 2 covers...$10.50 each set  SDKFZ 234/2 Puma armored steering arm shield flap set. Set includes 4 flaps....$12.00 each 
SDKFZ 234/2 Puma complete Suspension / chassis upgrade set. Set includes swing arms, hull inserts, steering arms, steering couplings, various hardware, leaf springs, hull bulkhead, aluminum drive shafts, and rubber dirt guards. Set is not intended for RC use, Static Model Use Only.....$650.00 each set 
  Resin SDKFZ 234 Puma leaf spring set. Set includes enough leaf spring components and hardware for one Puma...$109.00 each set. 
 Resin SDKFZ 234/2 Puma chassis bulkhead kit. Kit includes one bulkhead and 14 bolts and nuts, Kit is designed for the Pastic Panzers Puma kit...$9.50 each 
 Resin Early Tiger I drum copula full interior kit. Kit includes enough components to build the the copula with the interior details...$160.00 each 
 Resin early Tiger I drum copula basic kit. Kit includes enough components to build a exterior detailed Copula....$100.00 each kit
Resin and metal tow cable mounts and shackles set. Set includes enough pre assembled components for one Tiger I tank....$60.00 
 Resin and metal early tiger I loaders hatch kit. Kit includes enough components to assemble one loaders hatch....$55.00 each. 
Resin butterfly wing nut set. Set Includes 4 small wing nuts and 4 larger wing nuts....2.50 each set. 
 Resin Tiger I escape hatch kit....$25.00 each. 
 Early Tiger I fifel system complete kit. Kit includes air filter canisters, elbows, air intake, metal weave tubes, length of chain, fasteners, and copper funnels...$195.00 each package. 
Early Tiger I fifel system kit. Kit includes air filter canisters, elbows, length of chain, fasteners and air intake...$150.00 each set
Tiger I turret pistol port...$7.50 each 
Resin Tiger I suspension arm rubber bump stops set. Set includes 4 bump stops...$15.00    New tooling resin Tiger I track aligner set. Set includes 2 track aligners....$12.50 
Metal Tiger I inital prodoction rear mud flaps set. Set includes two mud flaps and two mud flap tips....$160.00 each set 
 Steel rear Tiger 1 exaust cover lift bolts set. Set includes 4 lift bolts.....$6.50 each set
Machined Tiger I deep water wading telescopic snorkel set. Set includes fully extended tube and snorkel head insert.........$40.00 each set 
 Resin Tiger I rear snorkel head insert.........$9.50 
 Tiger I rear engine deck hinge set. Set includes 2 hinges, 1 hing plate, 1 snorkel insert, 1 snorkel hatch, and 1 gas cap.......$25.00 
 Resin Tiger I turret lift bolts set. Set includes enough components for one tiger turret....$10.50 
 Resin Tiger I turret armored visor set. Set includes two visors.....$10.00 
 Resin Tiger I retracting driver armored visor kit. Kit includes enough components for one visor.....$20.00 
Resin Tiger I hollow bow machine gun mount set. Set includes1 hollow MG mount and 1 MG ball.....$15.00 
 Resin Tiger I starter kit. Kit includes enough components to assemble one starter...10.50 each kit 
Resin Tiger I Functional jack mounts set. Kit form...$9.50 each kit Fully Assembled set...$14.00 each set 
Resin Tiger rear access panel set. Set includes two rear idler access caps, and one engine starter Cap....$11.50 
Resin Tiger I tow hitch set. Set includes a tow hitch and a resin tow pin....$10.50 Each  Resin Tiger I complete exhaust upgrade package. Package includes a set of puffer caps, a set of exhaust tubes, and a set of armored exhaust caps....$115.00 each package 
 Resin Tiger I exhausts tubes set. Set includes two exhaust tubes, threaded rods, hex nuts, plastic discs, and a set of puffer caps....$65.00 each set
Resin Tiger I rear exhaust armored covers set. Set includes two covers and four machined steel Lift bolts.....$45.00 each set Resin Tiger I functional rear exhaust puffer caps kit. Kit includes enough components for two puffer caps....$15.00 each kit Tiger I final drive transmission hub set. Set includes 2 hubs....$45.00 each set 
 German AFV smoke discharger kit. Kit includes enough components for two smoke dischargers...$25.00 each kit. 
Resin "Insta Weld" weld beads set Set Includes 1 foot of welds...$5.00 each foot 
 |
|
| Home1/6th scale1/35th scaleModel GalleryContactLinks | |
